332-428 Ford FE Engine Forum (Page 4 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 21 Visitors 68FBMustang, 20 guests

Not logged in | Login | Create Account

Post Now!

non fe, the old lady has been on my case for weeks View Thread - mike saathoff on Dec 21, 2008, 2:35 PM

looks fine to me - Tom P on Dec 21, 2008, 2:51 PM

Thanks for the LOL N/M - Mario428 on Dec 21, 2008, 3:43 PM

Peace & Quiet - Zilla_58 on Dec 21, 2008, 4:25 PM

Mike, you need to work on the "relationship" thing, that way she'll be happy ... - David F. on Dec 21, 2008, 4:27 PM

Yea their funny - Steve Corbin on Dec 21, 2008, 5:07 PM

I've had mistletoe hanging from my zipper for weeks - Bill Ballinger on Dec 21, 2008, 5:10 PM

Lol, that's funny. I would pull something like that but I'm afraid of my wife :) - Ray Hillebrand on Dec 21, 2008, 5:48 PM

Bah, humbug!...n/m - Dr. Mabuse on Dec 21, 2008, 7:04 PM

Does it say "FE" when lit? LOL........n/m - Rod C on Dec 22, 2008, 4:52 AM

The Year of the Cammer / Bill Coon View Thread - Roger Gordon on Dec 21, 2008, 12:09 PM

Thanks for the update. - Dave Shoe on Dec 21, 2008, 1:27 PM

Now I did it .... screwed up again! View Thread - Dave Bickler on Dec 21, 2008, 11:38 AM

I hate it when that happens...n/m - Dr. Mabuse on Dec 21, 2008, 11:57 AM

Wow, - mike saathoff on Dec 21, 2008, 12:03 PM

Rear stripe - Dave Bickler on Dec 21, 2008, 12:17 PM

Keep trying - Tim O'Connor on Dec 21, 2008, 1:22 PM

yep... what he said - XR7 on Dec 21, 2008, 1:41 PM

Re: yep... what he said - mikegt500 on Dec 21, 2008, 2:03 PM

good advice - XR7 on Dec 21, 2008, 2:18 PM

Now I know what to get the next time we have a mutual - Cyclone crazy on Dec 21, 2008, 3:28 PM

hey Chuck! - XR7 on Dec 21, 2008, 3:56 PM

liquor and laquer was the saying............ - Tim O\'Connor on Dec 21, 2008, 2:31 PM

Before you pull the intake - Barry R on Dec 21, 2008, 2:19 PM

Rotunda FoMoCo Dealers tool supplier had an expanding tipped - qikBBstang on Dec 22, 2008, 10:02 AM

Keep trying indeed. - Barry Byer on Dec 21, 2008, 3:05 PM

OK guys I'll give it another try ... - Dave Bickler on Dec 21, 2008, 4:41 PM

Nice looking heap there Dave........................... - RonW on Dec 21, 2008, 7:56 PM

I feel better knowing I'm not the only one who has done that - Bill Balllinger on Dec 21, 2008, 7:17 PM

I just did that a few days ago!! Doh! - Jason Engle on Dec 22, 2008, 4:41 AM

Re: Now I did it .... screwed up again! - Anonymous on Dec 21, 2008, 4:37 PM

welding rod - Steve Corbin on Dec 21, 2008, 5:11 PM

For future reference, try spinning/twisting the pushrod like an Acupuncturist's........ - Rod C on Dec 22, 2008, 5:20 AM

Advise on what type of rings to use and which manufacturer.. View Thread - Rick on Dec 21, 2008, 8:49 AM

I use Speed Pro Molly Rings~ - Wes Adams Ford428CJ on Dec 21, 2008, 8:56 AM

Hey Rick..what size do you need and is the block already bored and honed ?? - winr1 on Dec 21, 2008, 12:31 PM

Standard n/m - Rick on Dec 21, 2008, 1:38 PM

anyone used/know about/rate these rockers? View Thread - Nick on Dec 21, 2008, 8:35 AM

The only thing I dont like is~ - Wes Adams Ford428CJ on Dec 21, 2008, 8:59 AM

I prefer ... - Mike Gaffney on Dec 21, 2008, 9:07 AM

Most Aluminum rockers are not bushed ~ - Wes Adams Ford428CJ on Dec 21, 2008, 9:17 AM

My Tp's Harland Sharp rockers are bushed. Worked well on .780" roller Lunati..... - Rod C on Dec 21, 2008, 10:14 AM

OK Rod~ - Wes Adams Ford428CJ on Dec 21, 2008, 10:20 AM

Thanks Wes, I tried to keep the HS needle-bearing set in the drawer for awhile, LOL....n/m - Rod C on Dec 21, 2008, 10:29 AM

Brent one of the vendors here .... - Mike Gaffney on Dec 21, 2008, 9:03 AM

You'll get a better deal - FElony on Dec 21, 2008, 9:05 AM

Talked to them at PRI - Barry R on Dec 21, 2008, 9:59 AM

What?!?! No iron heads on hand!?!?! - FElony on Dec 21, 2008, 10:06 AM

Well Felony~ - Wes Adams Ford428CJ on Dec 21, 2008, 10:09 AM

Re: Well Felony~ - FElony on Dec 21, 2008, 10:19 AM

Not there yet, but working on it! - Wes Adams Ford428CJ on Dec 21, 2008, 10:22 AM

Need more than the heads - Barry R on Dec 21, 2008, 2:21 PM

Re: Need more than the heads - FElony on Dec 21, 2008, 4:01 PM

message for Barry R... - Nick on Dec 21, 2008, 10:08 AM

They use 6061-T6 aluminum not very strong - Mario428 on Dec 21, 2008, 10:41 AM

Which rocker arms are yours? - FElony on Dec 21, 2008, 10:45 AM

Machined my own - Mario428 on Dec 21, 2008, 12:23 PM

Re: Machined my own - FElony on Dec 21, 2008, 1:09 PM

Mario be careful with that Temper! - Joe Burnett on Dec 21, 2008, 9:08 PM

Next set will be 7068 - Mario428 on Dec 22, 2008, 2:43 AM

Re: They use 6061-T6 aluminum not very strong - afret on Dec 21, 2008, 12:08 PM

My stands are 6061-T6 - Mario428 on Dec 21, 2008, 12:17 PM

What stuff is screwed-up by the 10% Alky Gasoline View Thread - qikBBstang on Dec 21, 2008, 8:00 AM

Jim,you still here - Bobby Spears on Dec 21, 2008, 8:09 AM

You're just down getting E10 gas? - Josh on Dec 21, 2008, 8:17 AM

Article on effects of ethanol on carb parts: - Bob on Dec 21, 2008, 8:57 AM

2 Strokes have that problem on that Fuel. You have to up it~ - Wes Adams Ford428CJ on Dec 21, 2008, 9:09 AM

What if... - Mike on Dec 21, 2008, 9:17 AM

Hey Mike, - Wes Adams Ford428CJ on Dec 21, 2008, 10:04 AM

Side effects. - Mike on Dec 21, 2008, 9:14 AM

Use a rake BB... - Tommy-T on Dec 21, 2008, 9:35 AM

Only a tree hugger would use a rack LOL~ - Wes Adams Ford428CJ on Dec 21, 2008, 10:06 AM

Screw an FE powered blower, I have a lawn sweep that goes behind my tractor... - Hawkrod on Dec 21, 2008, 3:38 PM

You........if you ingest it. Hell, Canadian beer ain't even 10%, yet....LOL......n/m - Rod C on Dec 21, 2008, 10:17 AM

I think may have found my autolite problem? View Thread - John on Dec 21, 2008, 7:47 AM

Not sold separately AFAIK. - WerbyFord on Dec 21, 2008, 11:57 AM

Tork specs flywheel View Thread - gordy on Dec 21, 2008, 7:36 AM

Re: Tork specs flywheel - Richard Dinsen on Dec 21, 2008, 8:08 AM

This must put a new levil on PSE manifold adaptor FE/Clev spacer View Thread - qikBBstang on Dec 21, 2008, 5:45 AM

level ? - Anonymous on Dec 21, 2008, 6:46 AM

I think that was the point... - Jay Brown on Dec 21, 2008, 8:27 AM

Since his 'idol'.... - KenS on Dec 21, 2008, 9:02 AM

Bedoian - FElony on Dec 21, 2008, 9:25 AM

Of course he was nice to you... - Dr. Mabuse on Dec 21, 2008, 9:40 AM

Re: Of course he was nice to you... - FElony on Dec 21, 2008, 10:16 AM

From the sounds of it, I think Paul wrote the description. - Dave Shoe on Dec 21, 2008, 9:46 AM

Well, as I said - FElony on Dec 21, 2008, 10:03 AM

Sorry. I hadn't read your post. - Dave Shoe on Dec 21, 2008, 10:31 AM

Re: Sorry. I hadn't read your post. - FElony on Dec 21, 2008, 10:43 AM

You will be fine, you just have a sense of humor that is an aquired taste - Bill Ballinger on Dec 21, 2008, 5:02 PM

$1600 - Tom P on Dec 21, 2008, 10:04 AM

Re: $1600 - FElony on Dec 21, 2008, 10:09 AM

so, how do you think Republican politics differ from Democratic ones? Same people. - JMO on Dec 21, 2008, 10:16 AM

WOW!! That was fast... - DaleP on Dec 21, 2008, 10:22 AM

people & parts can be hurt. Only pain a politician feels is if a hand is still stuck up... - JMO on Dec 21, 2008, 10:29 AM

Let's beat up on me - FElony on Dec 21, 2008, 10:32 AM

If you notice, - FElony on Dec 21, 2008, 10:24 AM

Hmmm.. What could I buy... - MeanGene on Dec 21, 2008, 11:18 AM

I missed the first one, I left my black Nikes at home - Bill Ballinger on Dec 21, 2008, 12:54 PM

Hey, 'Prison-for-more-than-a-year-and-a-day'.... - KenS on Dec 21, 2008, 3:01 PM

Gee - FElony on Dec 21, 2008, 4:04 PM

Will the front coil springs View Thread - Mike Ratterree on Dec 21, 2008, 5:15 AM

You can ... - Mike Gaffney on Dec 21, 2008, 6:48 AM

Springs - Jim M on Dec 21, 2008, 8:29 AM

Headers & edelbrock heads... View Thread - Craig on Dec 21, 2008, 5:14 AM

No problem. Takes the same header. N/M - Royce on Dec 21, 2008, 5:28 AM

o/t What year did Ford change the designation from F-100 to F-150? Also... View Thread - David F. on Dec 21, 2008, 4:06 AM

I think 1973,,,,,, - garry on Dec 21, 2008, 7:01 AM

1975... - Josh on Dec 21, 2008, 7:38 AM

As noted, Ford never changed the F100 to an F150 - Hawkrod on Dec 21, 2008, 8:09 AM

Strong rumors say they are bringing the F100 back... - Josh on Dec 21, 2008, 8:14 AM

Actually we're trying for a P/U in the mid-size range, think Dakota, etal. IIRC, it's..... - Rod C on Dec 21, 2008, 10:27 AM

Sized like the original Dakota, .... - Mike Radke on Dec 22, 2008, 2:29 PM

A Buddy of mine owned a Ford Dealership back - DaleP on Dec 21, 2008, 9:39 AM

Nope, it was strictly a way to get around Federal emissions standards. N/M - Hawkrod on Dec 21, 2008, 2:13 PM

May well be, but I'm pretty sure you - DaleP on Dec 21, 2008, 2:25 PM

Made me go look.... - Hawkrod on Dec 21, 2008, 4:00 PM

I know in 1980 - Tom J. on Dec 21, 2008, 4:36 PM

1975, no cat-converters required on F150's...n/m - Dr. Mabuse on Dec 21, 2008, 11:59 AM

Ford F-150 - nixobilly on Dec 21, 2008, 12:07 PM

Re: Ford F-150 - Rory McNeil on Dec 21, 2008, 2:10 PM

F100 - Tom P on Dec 21, 2008, 3:07 PM

I believe early 80's F100 could have C-4's behind the 302 - Gary B on Dec 21, 2008, 8:09 PM

They swiss cheezed the frame and used stamped front end parts - Bill Balllinger on Dec 21, 2008, 9:07 PM

Re: They swiss cheezed the frame and used stamped front end parts - Rory McNeil on Dec 21, 2008, 9:45 PM

I think you are correct it was an '80, talk about a flexi-flyer - Bill Ballinger on Dec 22, 2008, 6:55 AM

I've got one of those swiss cheese 1980 F150's - Gary B on Dec 22, 2008, 8:41 AM

GVW of my 74 F100 is 5100 lbs n/m - Josh on Dec 21, 2008, 8:47 PM

I had a '79 F100 (edited typo error) - Richard F on Dec 22, 2008, 5:36 AM

are you sure you bought it new - dablack on Dec 22, 2008, 5:57 AM

Typo on my part.....it was a '79 - Richard F on Dec 22, 2008, 9:26 AM

Problems using "Ford parts catalog" 1965-1972 View Thread - Tbolt on Dec 20, 2008, 10:23 PM

paper is best - Tom P on Dec 20, 2008, 11:54 PM

yes, I have 2 of them - Bob C on Dec 21, 2008, 3:12 AM

I look at the first section - Bobby Spears on Dec 21, 2008, 8:08 AM

O/T but great advice!! View Thread - Barry Byer on Dec 20, 2008, 9:55 PM

Re: O/T but great advice!! - Bobby Spears on Dec 20, 2008, 10:11 PM

Too true to be funny!! - Roger Gordon on Dec 21, 2008, 1:54 AM

OT Synthetic trans fluid in a daily driver View Thread - Doug on Dec 20, 2008, 8:32 PM

Probably not, unless you are hauling heavy loads. - Dave Shoe on Dec 20, 2008, 9:50 PM

I run Mobil 1 oil and Mobil1 ATF in everything I have with an Auto - qikBBstang on Dec 21, 2008, 5:32 AM

Re: I run Mobil 1 oil and Mobil1 ATF in everything I have with an Auto - Doug on Dec 21, 2008, 6:24 AM

IMO, follow the manufacturer's recommendation. If it were an automatic, I'd still......... - Rod C on Dec 21, 2008, 6:55 AM

For manuals......Dave Mc Kee says no. - Bob on Dec 21, 2008, 8:33 AM

Found a link... - Doug on Dec 21, 2008, 9:51 AM

No.... - Bob on Dec 21, 2008, 10:23 AM

Synthetic atf - Richard on Dec 22, 2008, 12:22 PM

Saturday Night Talk To FElony View Thread - FElony on Dec 20, 2008, 8:24 PM

Try this - Frank Bowers on Dec 20, 2008, 8:35 PM

Re: Try this - FElony on Dec 20, 2008, 8:40 PM

Good stuff nm - John on Dec 20, 2008, 8:47 PM

Okee Dokey Then - FElony on Dec 20, 2008, 8:48 PM

Ding ding - FElony on Dec 20, 2008, 9:01 PM

Maybe you would like this - Frank Bowers on Dec 20, 2008, 9:33 PM

Geez Frank, that made me laugh out loud! - Gary B on Dec 20, 2008, 11:20 PM

How you doing FElony? - Garyford on Dec 20, 2008, 9:08 PM

Re: How you doing FElony? - Bill Holm on Dec 20, 2008, 9:26 PM

Re: How you doing FElony? - Barry Byer on Dec 20, 2008, 10:27 PM

Bellingham, less than a foot deep - Gary B on Dec 20, 2008, 11:18 PM

I'm right there with ya Gary!!! - Wes Adams Ford428CJ on Dec 20, 2008, 10:29 PM

Hey Wes - Gary B on Dec 20, 2008, 11:23 PM

Well Gary, My Family and I plan~ - Wes Adams Ford428CJ on Dec 20, 2008, 11:30 PM

Wimps, the lot of ya..... - DaleP on Dec 21, 2008, 2:17 AM

ooh, come on Dale, cant I play too!?~ - Wes Adams Ford428CJ on Dec 21, 2008, 10:16 AM

Dale, we're modest. It's not that we can't drive in snow - Gary B on Dec 21, 2008, 10:38 AM

I'm sure this one isn't new to most - Ian on Dec 21, 2008, 2:44 AM

Re: I'm sure this one isn't new to most - FElony on Dec 21, 2008, 9:31 AM

Re: I'm sure this one isn't new to most - Rory McNeil on Dec 21, 2008, 2:20 PM

LOL! - FElony on Dec 21, 2008, 4:08 PM

Love them power tools!! - Steve Roehrs on Dec 21, 2008, 7:18 AM

Who makes a good quality fiberglass hood..................... View Thread - Blair Patrick on Dec 20, 2008, 7:59 PM

In your neck o' the woods - FElony on Dec 20, 2008, 8:08 PM

Here is a entire front clip... fiberglass: - Pippin on Dec 20, 2008, 10:53 PM

Might be easier and cheaper to.. - DaleP on Dec 21, 2008, 2:20 AM

US Body Source - Rory McNeil on Dec 21, 2008, 2:26 PM

Way O.T....Question for the Motorcycle guys? View Thread - Tbolt on Dec 20, 2008, 6:35 PM

might be able to id, let me post on another forum.... - derek on Dec 20, 2008, 7:11 PM

Re: might be able to id, let me post on another forum.... - derek on Dec 20, 2008, 7:24 PM

Definitely for R1/6 - bill sommers on Dec 21, 2008, 5:14 AM

Re: Way O.T....Question for the Motorcycle guys? - bykpainter on Dec 21, 2008, 7:28 AM

Thanks for the responses. nm - Tbolt on Dec 21, 2008, 8:23 AM

That would be EXUP valve... - LanceH on Dec 21, 2008, 8:51 AM

Pix of hogged C0AE-D heads View Thread - Tom Custom on Dec 20, 2008, 3:50 PM

Re: Pix of hogged C0AE-D heads - FElony on Dec 20, 2008, 4:14 PM

Here's the deal. - Tom Custom on Dec 20, 2008, 4:23 PM

Re: Here's the deal. - FElony on Dec 20, 2008, 4:35 PM

I didn't know if that would be cool. - Tom Custom on Dec 20, 2008, 4:40 PM

Re: I didn't know if that would be cool. - FElony on Dec 20, 2008, 4:43 PM

The Persuader! - Tom Custom on Dec 20, 2008, 4:48 PM

Re: The Persuader! - FElony on Dec 20, 2008, 4:52 PM

Aren't those Yates heads?? - Tommy-T on Dec 20, 2008, 4:31 PM

Watcho talkin' 'bout, Willis - Tom Custom on Dec 20, 2008, 4:38 PM

Re: Watcho talkin' 'bout, Willis - FElony on Dec 20, 2008, 4:41 PM

Oh, the general shape of the chamber. - Tom Custom on Dec 20, 2008, 4:44 PM

Yates - FElony on Dec 20, 2008, 4:46 PM

Program - FElony on Dec 20, 2008, 4:57 PM

I still have a webpage - Tom Custom on Dec 21, 2008, 9:55 AM

Very nice car - Gary B on Dec 21, 2008, 12:49 PM

Butchery. Too bad,lissen, they are just junk, my address is... - Bill Ballinger on Dec 20, 2008, 8:24 PM

Leggo my Eggo! - Tom Custom on Dec 21, 2008, 1:35 PM

Hey Tom, - Rory McNeil on Dec 21, 2008, 2:29 PM

It sold once but the guy backed out claiming his basement flooded. - Tom Custom on Dec 21, 2008, 6:07 PM

Those things were neat. Usualy a '63 Galaxie 390 wagon would have them - Bill Ballinger on Dec 21, 2008, 5:08 PM

2009 CALENDAR View Thread - DEAN FORSTER on Dec 20, 2008, 11:45 AM

4783 Two Barrel Info request View Thread - Paul on Dec 20, 2008, 11:25 AM

I have started on this also and have picked up two 600 CFM R-6425s ... - Bob Sprowl on Dec 20, 2008, 6:50 PM

Here's a couple 4782/4783 pics for ya - HP Trends on Dec 21, 2008, 6:54 AM

Which way is best? - Paul Proefrock on Dec 21, 2008, 9:03 AM

To be sure you understand what I'm doing - Bob Sprowl on Dec 21, 2008, 2:42 PM

Hooker #6375 fit ??? View Thread - john vermeersch on Dec 20, 2008, 9:22 AM

they don't fit everywhere - Tom P on Dec 20, 2008, 10:02 AM

I have heard the Fairlane is tougher, but my - DaleP on Dec 20, 2008, 10:42 AM

Worst fit ever ! - pmw on Dec 20, 2008, 11:07 AM

6375 Hookers - John on Dec 20, 2008, 11:21 AM

I wish Kustom were still in business. They made a great set for the 63 Galaxies......n/m - Rod C on Dec 20, 2008, 11:36 AM

Something's changed with Hooker's design John.......... - Bill on Dec 20, 2008, 12:33 PM

Re: Hooker #6375 fit ??? - afret on Dec 20, 2008, 1:47 PM

toss em my way, LOL - XR7 on Dec 20, 2008, 1:57 PM

Re: toss em my way, LOL - afret on Dec 20, 2008, 1:59 PM

REF....?????????? - Craig on Dec 20, 2008, 2:07 PM

a guy in Arizona.... EDIT:...w/pics! - XR7 on Dec 20, 2008, 6:17 PM

REF is here in Kingman,AZ - Bobby Spears on Dec 20, 2008, 9:19 PM

A wise man once said... - Dr. Mabuse on Dec 20, 2008, 5:29 PM

REF Headers on a 66 Fairlane - DaleP on Dec 20, 2008, 6:58 PM

Re: REF Headers on a 66 Fairlane - BohManCj on Dec 22, 2008, 6:54 AM

Good catch on the 64... - DaleP on Dec 22, 2008, 9:53 AM

REF Headers - Jim on Dec 22, 2008, 6:03 PM

Re: REF Headers - BohManCj on Dec 22, 2008, 9:05 PM

Heads make a difference. - fecarman on Dec 21, 2008, 6:45 AM

My aftermarket Dove heads are cut - DaleP on Dec 21, 2008, 9:45 AM

63 1/2 with Cammer...member here? View Thread - Bob on Dec 20, 2008, 9:18 AM

Jack,,, - RWJ on Dec 20, 2008, 11:26 AM

Jack H. - Jim on Dec 20, 2008, 9:44 PM

Re: Jack H. - Jody Aberts on Dec 22, 2008, 5:11 AM

Got the autolite up and running! One minor problem. View Thread - John on Dec 20, 2008, 8:59 AM

Just a guess, but it could be heat soak - Ryan on Dec 20, 2008, 11:04 AM

My 70 Monterey did that since new... - Al on Dec 20, 2008, 12:13 PM

Barry had a suggestion about this for Holley's. - Bob Sprowl on Dec 20, 2008, 7:06 PM

Something to check - Dave Coleman on Dec 20, 2008, 6:52 PM

I'm with Dave - Bob C on Dec 21, 2008, 4:12 AM

I believe I may have a flooding problem! - John on Dec 21, 2008, 4:50 AM

May be PV leak... - Richard Dinsen on Dec 21, 2008, 8:16 AM

Just got a new Calf Mustang Catalog. Shocking the prices View Thread - qikBBstang on Dec 20, 2008, 8:40 AM

all new - Tom P on Dec 20, 2008, 9:58 AM

Bent push rod View Thread - Rick on Dec 20, 2008, 7:16 AM

I'd..... - Bob on Dec 20, 2008, 7:27 AM

How push rod was bent. - Rick on Dec 20, 2008, 7:30 AM

bent pushrod - john tolliver on Dec 20, 2008, 8:09 AM

That.... - Bob on Dec 20, 2008, 9:18 AM

New Engine n/m - Rick on Dec 20, 2008, 9:36 AM

In a new.... - Bob on Dec 20, 2008, 9:56 AM

Ouch... - Jay Brown on Dec 20, 2008, 10:01 AM

If this was NEW - john vermeersch on Dec 20, 2008, 10:30 AM

How to pump up lifters - Rick on Dec 20, 2008, 11:05 AM

See.... - Bob on Dec 20, 2008, 12:23 PM

Re: How to pump up lifters - Anonymous on Dec 20, 2008, 2:23 PM

OT Just watched "Gran Torino" View Thread - Earl on Dec 19, 2008, 9:33 PM

Gran Torino - Frank Bowers on Dec 19, 2008, 10:39 PM

Woo Hoo !!..I saw a couple of trailers on u-tube !! Clint is back !!! - winr1 on Dec 19, 2008, 11:23 PM

A Friend owns......... - Earl on Dec 20, 2008, 5:33 AM

Looks great!! - Tim on Dec 20, 2008, 3:14 AM

Portions of the movie were shot in the Detroit area.........n/m - Rod C on Dec 20, 2008, 5:59 AM

The location.......... - Earl on Dec 20, 2008, 6:11 AM

re: Gran Torino - 427Kevin on Dec 20, 2008, 8:33 AM

Arnold is busy right now, He can't come to the phone. - Beoweolf on Dec 20, 2008, 8:55 AM

Re: Arnold is busy right now, He can't come to the phone. - Rory McNeil on Dec 20, 2008, 10:05 AM

support this film - Don on Dec 20, 2008, 9:05 AM

A few early observation on my part - Cliff Harmon on Dec 20, 2008, 9:28 AM

"Smoggers" were out way before that. Just look at all the restorers scrambling....... - Rod C on Dec 20, 2008, 10:25 AM

Re: A few early observation on my part - Tony O on Dec 20, 2008, 1:16 PM

the Gran Torino Sport was a great car... - Dr. Mabuse on Dec 20, 2008, 6:04 PM

What did the grille of a base 1972 Torino look like? - Dave Shoe on Dec 21, 2008, 1:59 PM

Re: What did the grille of a base 1972 Torino look like? - Rory McNeil on Dec 21, 2008, 2:46 PM

I do now recall the look. - Dave Shoe on Dec 22, 2008, 6:56 AM

The Gonkulator says about 281-303hp gross for 351cj 71-72 - WerbyFord on Dec 21, 2008, 6:04 PM

no,no. no, no. - steve meyer on Dec 20, 2008, 5:39 PM

Going to the movies - Beoweolf on Dec 20, 2008, 9:33 AM

Better think twice about taking your family - Earl on Dec 20, 2008, 12:17 PM

"Values" question...................................... - RonW on Dec 20, 2008, 3:08 PM

rated R, language & violence...n/m - Dr. Mabuse on Dec 20, 2008, 6:12 PM

Thanks Doc....................n/m - RonW on Dec 20, 2008, 7:40 PM

So is prime time TV nowadays LOL n/m - Bill Ballinger on Dec 20, 2008, 8:19 PM

To bad they did not use a Pinto,then they could have called it Fireball.n/m - bbr60 on Dec 20, 2008, 10:45 AM

There were many vehicles that were worse fireballs than the Pinto. - Barry Gaugler on Dec 20, 2008, 11:49 AM

(action hero Clint is 78 years old!) a reviewers quote... - Dr. Mabuse on Dec 20, 2008, 6:14 PM

Re: (action hero Clint is 78 years old!) a reviewers quote... - derek on Dec 20, 2008, 7:15 PM

Gran Torino - Mat on Dec 21, 2008, 2:29 AM

Not Fe but I have several View Thread - Worth, Blaine on Dec 19, 2008, 8:46 PM

30A breaker should work - Gary B on Dec 19, 2008, 8:53 PM

code - Dan Moore on Dec 20, 2008, 5:08 PM

Agree with Gary - Dave King on Dec 19, 2008, 9:31 PM

Compressor - Worth, Blaine on Dec 19, 2008, 10:12 PM

I would stay with the 30................................ - RonW on Dec 19, 2008, 10:44 PM

Well, now hang on here. - Dave King on Dec 19, 2008, 10:44 PM

Wire size - Worth, Blaine on Dec 19, 2008, 11:09 PM

#10 Cu wire will be protected by 30A breaker, not 50A - Gary B on Dec 20, 2008, 3:01 AM

Never double up on a breaker, especially motors. Code demands dedicated circuits for...... - Rod C on Dec 20, 2008, 4:12 AM

You cannot garantee that - 1960 Town Vic on Dec 20, 2008, 6:51 AM

50 amp is a no-no - MeanGene on Dec 20, 2008, 7:49 AM

Oh, it'll work.... - doug smith on Dec 20, 2008, 8:36 AM

OK - John on Dec 20, 2008, 8:40 PM

T&D SOHC Rocker Update View Thread - Jay Brown on Dec 19, 2008, 8:21 PM

Ductile Iron - MeanGene on Dec 19, 2008, 8:56 PM

A D8 might weigh over #85,000!...n/m - Dr. Mabuse on Dec 20, 2008, 3:45 PM

Jay, just a thought,.... - KenS on Dec 19, 2008, 10:33 PM

If the spring clips are stamped, the burr side might be backward. - Dave Shoe on Dec 19, 2008, 11:40 PM

T&D rocker issues - Keith Craft on Dec 19, 2008, 11:40 PM

Beehive springs - Rick Lake on Dec 20, 2008, 3:06 AM

Re: Behives/Rick do you also have a SOHC or could be comparing Apples to Oranges - qikBBstang on Dec 20, 2008, 4:10 AM

Re: Beehives - MeanGene on Dec 20, 2008, 7:19 AM

Springs - Keith Craft on Dec 21, 2008, 1:52 AM

Thanks... - Jay Brown on Dec 20, 2008, 9:59 AM

Rockers - Keith Craft on Dec 21, 2008, 1:56 AM

SOHC rockers & jay brown - gopher on Dec 21, 2008, 9:52 AM

I agree Gopher. Imagine if these parts were released and the problems arose for alot.... - Rod C on Dec 21, 2008, 10:44 AM

Tulip Exhaust Valve ? View Thread - Gary on Dec 19, 2008, 7:02 PM

Yep - Jim on Dec 19, 2008, 7:48 PM

me too... - XR7 on Dec 19, 2008, 8:35 PM

+3 n/m KS - KenS on Dec 19, 2008, 10:35 PM

Does anyone have pix of Crites Tbolt headlight kit? View Thread - Tom Custom on Dec 19, 2008, 6:11 PM

air intake - john on Dec 19, 2008, 8:48 PM

Tom, I`m not sure but,,,,, - garry on Dec 20, 2008, 9:56 AM

Air Kit - John Kuhn on Dec 20, 2008, 10:08 AM

Sounds like I should just commit to making my own. - Tom Custom on Dec 20, 2008, 3:52 PM

how do you write the "not so sure" sound Lurch made on the Adams Familly?: View Thread - qikBBstang on Dec 19, 2008, 6:01 PM

dont be a friggin idiot - kelly on Dec 19, 2008, 6:31 PM

Okay, so the Arctic is melting, where's the proof that it is a result of human activity? - David F. on Dec 19, 2008, 6:46 PM

go tell it to scientists - kelly on Dec 19, 2008, 7:25 PM

Nature pumps more do-do into the atmosphere than does human activity. - David F. on Dec 19, 2008, 7:31 PM

David, you hit the nail.... - KenS on Dec 19, 2008, 10:46 PM

thats a pure cop-out,,, A baby messes 'cause that its job... - Beoweolf on Dec 20, 2008, 7:19 AM

It's not a copout if it is factual - Gary B on Dec 20, 2008, 10:49 AM

and ketchup is a vegetable - kelly on Dec 21, 2008, 7:08 AM

We don't need to tell the scientists, they are telling us: - Gary B on Dec 19, 2008, 8:13 PM

don't be an idiot yourself . .read on - Pete's Ponies on Dec 19, 2008, 10:51 PM

50-50. - Dave Shoe on Dec 19, 2008, 11:42 PM

if there werent record profits on the line - kelly on Dec 20, 2008, 3:49 AM

You're right, it's a worldwide conspiracy perpetrated by one man. End of discussion. lol - David F. on Dec 20, 2008, 5:46 AM

Al Gore tells us that debate is unhealthy - Royce on Dec 20, 2008, 6:04 AM

There is no real proof only an agenda. The Arctic is melting, but what is causing it? - Barry Gaugler on Dec 20, 2008, 1:09 PM

global warming - mike saathoff on Dec 19, 2008, 7:09 PM

Bravo! Looks like science will be a part of this upcoming administration. - Dave Shoe on Dec 19, 2008, 7:32 PM

Al Gore is NOT a scientist - Gary B on Dec 19, 2008, 8:03 PM

I said science, not global warming. - Dave Shoe on Dec 19, 2008, 9:36 PM

I'm hopefull too Dave, but the guy taught at Berkley for 20 years, wrote political books - Gary B on Dec 19, 2008, 10:10 PM

Holdren can hardly be considered a scientist.... - doug smith on Dec 20, 2008, 6:19 AM

True ... No more than Supreme Court Justices can be considered Lawyers - Beoweolf on Dec 20, 2008, 8:58 AM

Roosevelt's policies extended the depression for seven years. - Barry Gaugler on Dec 20, 2008, 4:04 PM

Might be true or not...but a lot of people had food on the table - Beoweolf on Dec 20, 2008, 7:59 PM

That is a convenient assumption for socialists - Garyford on Dec 20, 2008, 8:56 PM

The solution to global warming - 1960 Town Vic on Dec 19, 2008, 8:02 PM

I`m freezing my azz off in this "Global Warming"! - Rory McNeil on Dec 19, 2008, 9:20 PM

Does anyone still believe in Global Warming? - Gary B on Dec 19, 2008, 9:26 PM

something I can agree with - Tom P on Dec 19, 2008, 9:54 PM

What They Don't! - Howie on Dec 20, 2008, 4:50 AM

Does Jay need to recalibrate his dyno? - Doug S on Dec 20, 2008, 1:04 PM

I'm all for it - Falcon67 on Dec 19, 2008, 9:29 PM

The part that gets me is they can't even get their numbers straight or use Logic - qikBBstang on Dec 20, 2008, 5:18 AM

It seems to me .... - Mike Gaffney on Dec 20, 2008, 6:22 AM

there's always to much financial incentives to the Green Side ie Carbon Credits>.. n/m - qikBBstang on Dec 20, 2008, 7:12 AM

$-how much ya wanna throw at nothing.nm - Lowell on Dec 20, 2008, 8:05 AM

Common sense vs. extremism - doug smith on Dec 20, 2008, 8:28 AM

dude, try not to be so completely wrong - kelly on Dec 20, 2008, 8:53 AM

Thanks for making my point Kelly.... - doug smith on Dec 20, 2008, 9:50 AM

Kelly.... - KenS on Dec 20, 2008, 9:53 AM

Re: Kelly.... - steve on Dec 20, 2008, 10:20 AM

If Kelly truly believes this crap.... - RJP on Dec 20, 2008, 10:48 AM

Does anyone have any idea how deep I should cut - Inthegarge on Dec 20, 2008, 7:09 AM

I don't know how this particular.... - KenS on Dec 20, 2008, 10:13 AM

I think what he is saying, is "let's get back to talking FEs, rather than this stuff" n/m - David F. on Dec 20, 2008, 10:23 AM

OK so how do - Lowell on Dec 20, 2008, 7:55 AM

OK, I'll bite... - Tommy-T on Dec 20, 2008, 10:46 AM

Where did the oil come from - Gary B on Dec 20, 2008, 11:14 AM

I am too dumb... - Tommy-T on Dec 20, 2008, 4:55 PM

I believe there is a good sense balance - Bill Ballinger on Dec 21, 2008, 7:27 AM

Well said Bill. We now present for your entertainment "Ballinger Unplugged".. ;-}......n/m - Rod C on Dec 21, 2008, 8:44 AM

I want to hear Bill play also - Gary B on Dec 21, 2008, 10:31 AM

look at that guys pic! LOL - Goose on Dec 21, 2008, 3:19 PM

George nailed it Goose... - Mark Pruitt on Dec 21, 2008, 7:23 PM

2009 fe calender View Thread - Harry H on Dec 19, 2008, 4:56 PM

That's good news. - Bob Sprowl on Dec 19, 2008, 5:24 PM

Did ET Heads go under??? View Thread - Gary on Dec 19, 2008, 1:03 PM

Re: Did ET Heads go under??? - steve on Dec 19, 2008, 2:05 PM

Business is slow - Barry R on Dec 19, 2008, 4:41 PM

What are the - Aaron J. Benham on Dec 19, 2008, 7:03 PM

Yes - kinda - Barry R on Dec 20, 2008, 7:52 AM

That is the best deal around! - Bill Ballinger on Dec 20, 2008, 11:03 AM

Blue Thunder heads - Keith Craft on Dec 19, 2008, 11:49 PM

Autolite 4100 tuning! View Thread - John on Dec 19, 2008, 10:58 AM

The advice from Bill White - Bob C on Dec 19, 2008, 11:20 AM

Onlly adjustments are Float level, idle screws and - Inthegarge on Dec 19, 2008, 11:21 AM

Clean the booster clusters very well - Bill Ballinger on Dec 19, 2008, 6:28 PM

AS Bill said, clean the boosters..I have found crusty stuff in mine even after soaking - winr1 on Dec 19, 2008, 11:26 PM

Metallurgy question for The Shoe or whomever, is there an advantage to nitriding a forged View Thread - hollis franks on Dec 19, 2008, 9:35 AM

In a few words.... - KenS on Dec 19, 2008, 10:04 AM

Nitriding the crank - dedom on Dec 19, 2008, 11:34 AM

Nitriding cranks.... - RJP on Dec 19, 2008, 11:51 AM

Depends on the type of racing. - Dave Shoe on Dec 19, 2008, 12:07 PM

From the Crankshaft Co. - Bob on Dec 19, 2008, 12:24 PM

Here's a point for.... - KenS on Dec 19, 2008, 12:29 PM

Nice theory - dedom on Dec 19, 2008, 1:21 PM

I'd challenge the.... - KenS on Dec 19, 2008, 2:56 PM

You guys are missing the boat - qikBBstang on Dec 19, 2008, 3:06 PM

I've not studied the crack resisting properties. - Dave Shoe on Dec 19, 2008, 5:17 PM

Treating iron cranks... - RJP on Dec 19, 2008, 2:00 PM

Localized induction hardening for cranks...... - Bob on Dec 19, 2008, 2:18 PM

Nice article but.... - RJP on Dec 19, 2008, 3:20 PM

Actually...... - Bob on Dec 19, 2008, 4:35 PM

Austempering iron cranks. - Dave Shoe on Dec 19, 2008, 5:01 PM

Ahh a man who understands - dedom on Dec 19, 2008, 9:31 PM

Most forged steel cranks are probably made of medium carbon steel. - Dave Shoe on Dec 19, 2008, 10:21 PM

Dedom, you are offering.... - KenS on Dec 20, 2008, 10:29 AM

Question for everyone: How often have you seen an FE steel forged crank break? Isn't...... - Rod C on Dec 19, 2008, 3:22 PM

Malleable cast iron crank journals must be heat treated. - Dave Shoe on Dec 19, 2008, 5:10 PM

I believe you Dave, but Hollis was asking about a forged steel crank needing nitride...... - Rod C on Dec 19, 2008, 5:13 PM

A forged crank shouldn't require nitriding in most applications. - Dave Shoe on Dec 19, 2008, 5:35 PM

OT/I recieved this in my email and I passed it on to as many people as I could View Thread - Bill Ballinger on Dec 19, 2008, 6:54 AM

Thanks for posting Bill - Gary B on Dec 19, 2008, 9:12 AM

Thanks Bill - Bob C on Dec 19, 2008, 10:06 AM

Please do. The sacrifice of this young man speaks for all time. - Bill Ballinger on Dec 19, 2008, 10:16 AM

Way cool Bill...I will pas it on also.. - winr1 on Dec 19, 2008, 10:19 AM

Thanks Bill, I hear these stories from my son who is - Inthegarge on Dec 19, 2008, 11:24 AM

You are right about this great story Thanks !!!! - Lance on Dec 19, 2008, 11:29 AM

I've never served, but... - Lucas Massengale on Dec 19, 2008, 12:36 PM

Yeah, me, too, Lucas... - Marty Haynes on Dec 19, 2008, 1:55 PM

I never served either - Richard F on Dec 23, 2008, 8:49 AM

A true hero. - RJP on Dec 19, 2008, 2:06 PM

A real American Hero - wedgeman on Dec 19, 2008, 4:26 PM

My Feeling - Ranch on Dec 19, 2008, 4:55 PM

There is no offense to be taken, bless you for your code - Bill Ballinger on Dec 19, 2008, 5:37 PM

There are no words - Goose on Dec 19, 2008, 5:31 PM

O/T: Urethane Spring Bushings/Spring Supplier View Thread - Terry on Dec 19, 2008, 5:52 AM

As far as... - Bob on Dec 19, 2008, 7:04 AM

Thanks - Terry on Dec 19, 2008, 8:04 AM

To stop squeaks.... - KenS on Dec 19, 2008, 9:02 AM

Poly wanna squeak - Falcon67 on Dec 19, 2008, 9:26 AM

How about the spring pad? - Val406 on Dec 19, 2008, 4:54 PM

I just ordered some - Tom J. on Dec 19, 2008, 5:21 PM

OT/ A story from the past. View Thread - Bill Ballinger on Dec 19, 2008, 5:37 AM

Thanks........ - Earl on Dec 19, 2008, 6:01 AM

THANKS - DYNO427 on Dec 19, 2008, 9:30 AM

So now we add.... - KenS on Dec 19, 2008, 10:08 AM

Jesus, The Reason for the Season. - Mike saathoff on Dec 19, 2008, 10:10 AM

Seems I've heard that story before... - Tommy-T on Dec 19, 2008, 10:53 AM

Wonderful, Bill. This is great stuff... - Marty Haynes on Dec 19, 2008, 1:59 PM

O/T I'll be in the Birmingham Alabama area on Dec 30th thru Jan 3rd, are there any View Thread - TonyS. on Dec 19, 2008, 4:40 AM

Barber Museum - Jim on Dec 19, 2008, 3:09 PM

i'll be in the birmingham ala area - bill d on Dec 19, 2008, 5:44 PM

Black Widow type intake View Thread - Mario428 on Dec 19, 2008, 2:58 AM

Well, let's see. Why are the water holes on top and - Inthegarge on Dec 19, 2008, 11:27 AM

Email him and ask - Mario428 on Dec 19, 2008, 11:38 AM

I agree with Mario. the shape.... - KenS on Dec 19, 2008, 12:45 PM

It is for an FE - XR7 on Dec 19, 2008, 2:00 PM

After looking at the website again it appears there must - Inthegarge on Dec 19, 2008, 5:22 PM

Go to the gallery from the main page... - Josh on Dec 20, 2008, 4:08 PM

Don't know if it works.... - Goose on Dec 19, 2008, 5:32 PM

Exhaust Seat Erosion on C6AE-R heads View Thread - Brett on Dec 18, 2008, 11:39 PM

I run C8AE-H heads with harden seats~ - Wes Adams Ford428CJ on Dec 19, 2008, 6:07 AM

Yes, Yes, and No - WerbyFord on Dec 19, 2008, 7:04 AM

RE: Yes, Yes, and No - Brett on Dec 19, 2008, 9:16 AM

If done correctly ... installing hardened exhaust seats is not a problem - Beoweolf on Dec 19, 2008, 7:06 AM

valve seats - Richard on Dec 19, 2008, 8:02 AM

Somewhat recent..... - Bob on Dec 19, 2008, 8:33 PM

RE: Somewhat recent...... - Brett on Dec 19, 2008, 11:28 PM

I have a C0 and a C1 head on my 352, they have intake and exhaust seats installed...... - winr1 on Dec 19, 2008, 11:35 PM

So what about a lead additive? - Bob C on Dec 20, 2008, 4:55 AM

Lead additive post.... - Bob on Dec 20, 2008, 6:26 AM

Thats pretty much - Bob C on Dec 20, 2008, 9:38 AM

Stupid question......... About RTV.... View Thread - Tony D on Dec 18, 2008, 6:28 PM

Let the controversy begin!! - Jay Brown on Dec 18, 2008, 6:42 PM

I use also RTV on the ends of the intake.. - winr1 on Dec 18, 2008, 6:45 PM

Gaskets - RWJ on Dec 18, 2008, 7:24 PM

I've used - Anthony on Dec 18, 2008, 7:21 PM

I'll never use RTV... - Richard Dinsen on Dec 18, 2008, 7:21 PM

Correct usage of RTV - custom300 on Dec 18, 2008, 8:07 PM

just call me Mister Gasket - Tom P on Dec 18, 2008, 8:25 PM

Well, then call me Mr. Slather... - Tommy-T on Dec 18, 2008, 11:32 PM

Only use silicone sealer in non-stressed applications. - Dave Shoe on Dec 18, 2008, 8:28 PM

I agree with you completely on this. - Bob Sprowl on Dec 18, 2008, 9:49 PM

I agree completely - Mark Artis on Dec 19, 2008, 5:21 AM

corks - Bob Fermier FE BOB on Dec 18, 2008, 8:33 PM

I am with so many of these guys, I hate RTV sorta.... - Hawkrod on Dec 18, 2008, 9:21 PM

hey hawkrod and others... - robert on Dec 18, 2008, 10:04 PM

RTV & "Right Stuff" here - Rory McNeil on Dec 18, 2008, 10:29 PM

Indian Head is a Permatex product and you can get it a lot of places - Hawkrod on Dec 19, 2008, 7:24 AM

No RTV here on the ends. - Brent on Dec 19, 2008, 3:31 AM

3M weatherstrip adhesive & cork, but... - Dr. Mabuse on Dec 19, 2008, 4:07 AM

I want to try Rightstuff but just cant get myself to take the chance - Ross on Dec 19, 2008, 8:38 AM

I use the Motorcraft gray silicone - Barry R on Dec 19, 2008, 5:18 AM

YES, THAT'S DAM GOOD STUFF - Mark Artis on Dec 19, 2008, 5:24 AM

Info please - Barry R on Dec 19, 2008, 5:49 AM

Hylomar... - Richard Dinsen on Dec 19, 2008, 7:12 AM

Yep,and it is a mess if you hit it with alky - Bill Ballinger on Dec 19, 2008, 7:32 AM

Think Mark meant hylomar........ - Bob on Dec 19, 2008, 7:14 AM

Barry, do you have a part number for the Motorcraft silicone? N/M - rcodecj Nick on Dec 19, 2008, 3:10 PM

Ford part #: - Bob on Dec 20, 2008, 7:22 AM

gaskets and Right Stuff - Jason Engle on Dec 19, 2008, 7:23 AM

Warning about Right Stuff - Anthony on Dec 19, 2008, 5:10 PM

3M weatherstrip adhesive or "The Right Stuff" - Wes Adams Ford428CJ on Dec 19, 2008, 7:46 AM

Gaskets - Falcon67 on Dec 19, 2008, 9:30 AM

I ran, for a time,.... - KenS on Dec 19, 2008, 10:19 AM

63 galaxie register ? View Thread - mike saathoff on Dec 18, 2008, 5:18 PM

63 Galaxie Registry ? - Phil on Dec 19, 2008, 3:00 AM

Gear Vendor question! View Thread - Anonymous on Dec 18, 2008, 4:17 PM

GearVendors unit - Scrap Iron on Dec 18, 2008, 4:51 PM

GV - trz1000 on Dec 18, 2008, 5:27 PM

Got more info Pictures! - Anonymous on Dec 18, 2008, 6:25 PM

Don't see how you can go wrong ... - Mike Gaffney on Dec 18, 2008, 7:07 PM

Muhahahahaha!! Searching craigslist right now to scoop it!! n/m - Tony D on Dec 18, 2008, 7:19 PM

Re: Got more info Pictures! - Sode67FB on Dec 18, 2008, 7:39 PM

C6 one - Tom P on Dec 18, 2008, 8:30 PM

I think this is the one that Ford used behind the 460 on F250 and F350 - Pippin on Dec 18, 2008, 10:12 PM

I think it related to the Hone OD and it is an older design - Bill Ballinger on Dec 23, 2008, 10:20 AM

Be sure to use the analog box - Louie on Dec 18, 2008, 10:17 PM

I have A GV unit.... - KenS on Dec 19, 2008, 12:57 PM

O/T: If you gotta go and need mid-week relief, check out "photos"... n/m View Thread - Pippin on Dec 18, 2008, 3:01 PM

TRW L2303 Piston Source Resolved View Thread - FElony on Dec 18, 2008, 1:32 PM

Great detective work....so..being the same price are they making $$ on them ?? - winr1 on Dec 18, 2008, 6:50 PM

Of Course - FElony on Dec 18, 2008, 8:06 PM

any alternatives???? - ford429cjlover on Dec 19, 2008, 11:16 AM

Re: any alternatives???? - FElony on Dec 19, 2008, 2:24 PM

FE forgings - Barry R on Dec 19, 2008, 5:32 PM

You are talking to the man there FEl - Bill Ballinger on Dec 19, 2008, 7:08 PM

Re: FE forgings - FElony on Dec 19, 2008, 7:27 PM

If Silvolite can keep quality up they will work - Bill Ballinger on Dec 19, 2008, 7:42 PM

Bill I can agree with ya on that~ - Wes Adams Ford428CJ on Dec 20, 2008, 7:14 AM

I'm interested - Aaron J. Benham on Dec 19, 2008, 7:00 PM

Re: I'm interested - FElony on Dec 19, 2008, 8:06 PM

Do you want to part with the 352 ones? - Bill Ballinger on Dec 19, 2008, 8:30 PM

Not at this time, Bill - FElony on Dec 20, 2008, 9:46 AM

one-man protest against offshore products - Goose on Dec 19, 2008, 5:45 PM

I'm with you FELony, all my stuff is lo-buck but runs good, I'll have the indian..... - winr1 on Dec 19, 2008, 11:21 PM

If I can get my son to help,I have the stuff to build a low bucker - Bill Ballinger on Dec 20, 2008, 3:30 AM

Sounds Like Fun! n/m - FElony on Dec 20, 2008, 10:36 AM

CPLL - FElony on Dec 20, 2008, 10:28 AM

O/ T anyone tried Eastwood steering wheel resto/repair kit ? View Thread - Warren 390 on Dec 18, 2008, 11:12 AM

yes, about 20 years ago - Don on Dec 18, 2008, 11:46 AM

Re: yes, about 20 years ago - Bob P. on Dec 18, 2008, 12:03 PM

I'll second that, Rustoleum paint for plastics is great n/m - TonyS. on Dec 19, 2008, 6:22 AM

Still PC7 - Dsrtfox on Dec 18, 2008, 11:56 AM

Re: Still PC7 - Bob P. on Dec 18, 2008, 12:08 PM

Steering Wheel restoration - Todd Fowler on Dec 18, 2008, 2:15 PM

Steering wheel repair - Anonymous on Dec 18, 2008, 3:23 PM

Thanks for the responses, I am always learning - Warren 390 on Dec 18, 2008, 5:05 PM

JB weld 2 part - mike saathoff on Dec 18, 2008, 5:11 PM

O/T Winter pics from the desert small pics but dial up warning View Thread - Hawkrod on Dec 18, 2008, 10:18 AM

Yikes! How's..... - Bob on Dec 18, 2008, 10:34 AM

So how bad was the 'bird damage after getting the branch down? - SLT on Dec 18, 2008, 10:37 AM

The planet has a fever! - A. Gore on Dec 18, 2008, 11:48 AM

Re: O/T Winter pics from the desert small pics but dial up warning - mike on Dec 18, 2008, 12:36 PM

At Least Your Safe - Wreckless Warren on Dec 18, 2008, 2:28 PM

Yeah we are fine - Hawkrod on Dec 18, 2008, 4:15 PM

Winter of 08 - steve meyer on Dec 18, 2008, 6:59 PM

white Christmas at least - Tom P on Dec 18, 2008, 8:19 PM

Which Desert you in? - Nathan on Dec 19, 2008, 9:49 AM

I am about an hour north west of you as the crow flies - Hawkrod on Dec 19, 2008, 1:06 PM

Richmond gear box View Thread - chris steart on Dec 18, 2008, 10:16 AM

Hey.... - Bob on Dec 18, 2008, 10:25 AM

shifter hole - Tom P on Dec 18, 2008, 8:48 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!