332-428 Ford FE Engine Forum (Page 10 )



Search:	Login / Register

Home - Forum - Classifieds - Archive - Photos - Tech - Events - Links

332-428 Ford FE Engine Forum
Visitors in this forum in the last 10 minutes: 22 Visitors 68FBMustang, 21 guests

Not logged in | Login | Create Account

Post Now!

SOHC '64 Fairlane? View Thread - Bob on Dec 5, 2008, 11:53 AM

he posts as "RWJ" - michael on Dec 5, 2008, 11:59 AM

Doh! Of course...... - Bob on Dec 5, 2008, 12:03 PM

Hey Homer, how ya doin'........n/m - Don Ragan on Dec 5, 2008, 2:43 PM

1967 Georgia Train Wreck, 427 Fairlanes destroyed ... View Thread - Bob on Dec 5, 2008, 11:52 AM

hate to tell you..... - ford429cjlover on Dec 5, 2008, 12:24 PM

Wow . never heard that one before.... - pmw on Dec 5, 2008, 12:25 PM

Re: Wow . never heard that one before.... - Dennis on Dec 5, 2008, 4:04 PM

Hey Dennis... - pmw on Dec 6, 2008, 8:39 AM

Re: Hey Dennis... - Dennis on Dec 6, 2008, 10:30 AM

Hondo,TX. - LanceH on Dec 5, 2008, 2:06 PM

Did you ever hear about the boatload of 427 at the bottom of the Detroit river? - garry on Dec 5, 2008, 2:11 PM

Re: Did you ever hear about the boatload of 427 at the bottom of the Detroit river? - steve on Dec 5, 2008, 3:31 PM

Re: Did you ever hear about the boatload of 427 at the bottom of the Detroit river? - Dennis on Dec 5, 2008, 3:40 PM

Dennis, were you in the Dearborn area in '67....... - Rick on Dec 5, 2008, 5:15 PM

Re: Dennis, were you in the Dearborn area in '67....... - Dennis on Dec 6, 2008, 10:24 AM

Stolen trailerload of carbs from NPD (or DPD?)... - Dr. Mabuse on Dec 6, 2008, 10:47 AM

It would be extremely rare to have a truckload of carbs shipped to either DPD or NPD. We.. - Rod C on Dec 6, 2008, 12:11 PM

NPD had lots of cool stuff... - Dr. Mabuse on Dec 6, 2008, 7:44 PM

NPD. DPD was one block west of Telegraph........n/m - Rod C on Dec 6, 2008, 8:28 PM

Well, the carb load could have been either coming or going...n/m - Dr. Mabuse on Dec 6, 2008, 7:49 PM

Re the stolen truck..... - Rick on Dec 6, 2008, 11:40 AM

railroads are strange....... - ford429cjlover on Dec 5, 2008, 5:18 PM

I believe it... - Dr. Mabuse on Dec 5, 2008, 6:09 PM

wild if people knew what trucks and rail hauled around them - Jaymz on Dec 5, 2008, 7:10 PM

Sorry, the Detroit River isn't deep enough not to retrieve racing engines. The shipping... - Rod C on Dec 5, 2008, 7:07 PM

You want to see one Oh My Gawd Hot Power Plant and a Train? - qikBBstang on Dec 5, 2008, 9:00 PM

Re: You want to see one Oh My Gawd Hot Power Plant and a Train? - Cobrabill on Dec 6, 2008, 5:57 AM

Re: You want to see one Oh My Gawd Hot Power Plant and a Train? - Cobrabill on Dec 6, 2008, 6:01 AM

My Grandfather... - Mike on Dec 6, 2008, 9:11 AM

Derailments - Bruce on Dec 6, 2008, 4:21 PM

fe parts View Thread - Jimmy hawkins on Dec 5, 2008, 11:39 AM

"Links" at the top of this page^^^...n/m - Dr. Mabuse on Dec 5, 2008, 1:07 PM

Another P.T.Barnum product destined for the J.C.Whitney curb feeler hall of fame. View Thread - bbr60 on Dec 5, 2008, 9:37 AM

My problem with oil filters~ - Wes Adams Ford428CJ on Dec 5, 2008, 9:48 AM

The only thing going for that is~ - Wes Adams Ford428CJ on Dec 5, 2008, 9:53 AM

Their claims are 99+ % B.S. ...n/m - Dr. Mabuse on Dec 5, 2008, 1:10 PM

No doubt, but if it makes the owner feel better, it must have some value. lol n/m - David F. on Dec 5, 2008, 3:27 PM

We're in luck; drill-down menu for app's only goes back to '95 - Dave Eames on Dec 5, 2008, 4:10 PM

Original vs concourse vs restomod View Thread - Steve Engberg on Dec 5, 2008, 9:36 AM

You are right about that! - Wes Adams Ford428CJ on Dec 5, 2008, 9:41 AM

Blasphemy!!! - Tommy-T on Dec 5, 2008, 12:15 PM

LOL! - Jay Brown on Dec 5, 2008, 12:27 PM

Yeah, but I don't know why. - SLT on Dec 5, 2008, 10:37 PM

Agree - afret on Dec 5, 2008, 12:18 PM

make them the way you want - fordsel on Dec 5, 2008, 12:20 PM

Scrounging the swap meets and the junkyards, - Jay Brown on Dec 5, 2008, 12:30 PM

I second /third that! - George Vega on Dec 5, 2008, 1:10 PM

Not me! - Tom P on Dec 6, 2008, 10:17 AM

That Mustang of your's was more interesting than restored - Gary B on Dec 5, 2008, 1:07 PM

Amen and amen...you have seen the light!... - Dr. Mabuse on Dec 5, 2008, 1:13 PM

Concours vs newer contours - Welch, John T. on Dec 5, 2008, 2:45 PM

Re: Concours vs newer contours - Laurie S. on Dec 5, 2008, 3:39 PM

Safe?... - Dr. Mabuse on Dec 5, 2008, 3:54 PM

Re: Safe?... - Laurie S. on Dec 5, 2008, 5:26 PM

Be afraid, be very afraid... - Dr. Mabuse on Dec 5, 2008, 6:15 PM

Re: Concours vs newer contours - Welch, John T. on Dec 5, 2008, 5:32 PM

Re: Concours vs newer contours - Laurie S. on Dec 5, 2008, 7:09 PM

Concours vs new contours - Welch, John T. on Dec 6, 2008, 8:56 AM

Whatdo you call close to original appearing BB/FE upgrade to a 289 2v car - Pippin on Dec 5, 2008, 4:53 PM

a good idea - kelly on Dec 5, 2008, 6:55 PM

I think It's very funny - Doug on Dec 5, 2008, 4:59 PM

So why do you only hear about ball joint failures in parking lots? - Pippin on Dec 5, 2008, 10:52 PM

It's JUST a hobby.... - Mark Pruitt on Dec 5, 2008, 5:34 PM

drive,m - Gord Bradley on Dec 5, 2008, 7:25 PM

I intended to drive my LWG on the street when I bought it. I plated it in 78 and took..... - Rod C on Dec 5, 2008, 7:32 PM

NSS - DEANs427 on Dec 6, 2008, 8:33 AM

My son removed the 6-point rollbar which was only welded at the center hoop and bolted.... - Rod C on Dec 6, 2008, 10:35 AM

Re: I intended to drive my LWG on the street when I bought it. I plated it in 78 and took..... - son of RodC on Dec 6, 2008, 9:43 AM

Shhhhh..... You blew our little secret, LOL. Hope it's warm enough for you in Cairo....n/m - Rod C on Dec 6, 2008, 10:39 AM

People , people who like people.... - Welch, John T. on Dec 6, 2008, 9:10 AM

I think the "Trick" of putting " Concours " little bits "here& there&qu - qikBBstang on Dec 5, 2008, 9:09 PM

Different strokes, - tom406 on Dec 5, 2008, 9:42 PM

Yeah no matter how strange their devotion to "original" is the pains they go through are - qikBBstang on Dec 5, 2008, 10:21 PM

You got my vote.... - Beoweolf on Dec 7, 2008, 9:15 AM

A bit of a Hi-Jack...BUT... - Tommy-T on Dec 6, 2008, 8:38 AM

Re: A bit of a Hi-Jack...BUT... - Rory McNeil on Dec 6, 2008, 12:19 PM

Way off topic but interesting quandry View Thread - Gary B on Dec 5, 2008, 9:03 AM

Neat. Fencl-Tufo here in the... - Bob on Dec 5, 2008, 10:36 AM

survivor - Tom P on Dec 5, 2008, 10:43 AM

I agree it is pretty nice how he is documenting things and keeping it original - Gary B on Dec 5, 2008, 12:46 PM

neat story, but original air in tires?! - Jason Engle on Dec 5, 2008, 11:01 AM

Yeah, that is streching..... - Bob on Dec 5, 2008, 11:23 AM

At least it ends better..... - Bob on Dec 5, 2008, 11:44 AM

original air - Tom P on Dec 5, 2008, 10:50 PM

Original Air... - Tommy-T on Dec 6, 2008, 8:52 AM

Anyone run 304 Stainless Steel FE headers ???........I have a chance to buy a set for..... View Thread - winr1 on Dec 5, 2008, 8:20 AM

Those are really nice! - Wes Adams Ford428CJ on Dec 5, 2008, 8:26 AM

Oil Stains - Terry on Dec 5, 2008, 9:10 AM

I have sst exhaust on my F100,,,,, - garry on Dec 5, 2008, 9:48 AM

Smokey was dumfounded while dyno testing a motor because steel headers got pits inside - qikBBstang on Dec 5, 2008, 10:32 PM

BB, don't forget 321. n/m KS - KenS on Dec 6, 2008, 3:20 PM

OT Code Scanner Recommendation View Thread - Steve DePalma on Dec 5, 2008, 7:21 AM

Most national parts chains scans them free - Bobby Spears on Dec 5, 2008, 8:16 AM

Re: Most national parts chains scans them free - Steve D on Dec 5, 2008, 8:39 AM

I bought mine @ Wally World~ - Wes Adams Ford428CJ on Dec 5, 2008, 8:22 AM

Re: I bought mine @ Wally World~ - Steve D on Dec 5, 2008, 8:35 AM

My OBDII scanner works on my 03 Stroker~ - Wes Adams Ford428CJ on Dec 5, 2008, 10:15 AM

If you find one let me know.... - garry on Dec 5, 2008, 9:34 AM

ScanGuageII...~$170... - Dr. Mabuse on Dec 5, 2008, 2:31 PM

Polymer-Matrix Composite Bearings View Thread - Bob on Dec 5, 2008, 7:15 AM

This has no bearing on that - Falcon67 on Dec 5, 2008, 7:20 AM

C'mon, I just got new glasses and none of that looked like English. Are you........ - Rod C on Dec 5, 2008, 7:24 AM

I've had very poor luck.... - KenS on Dec 5, 2008, 8:30 PM

O/T Anyone know of a web site of any other source of good pics or exploded View Thread - TonyS on Dec 5, 2008, 6:55 AM

1970 Mustang shut off problem... View Thread - Dave Walters on Dec 5, 2008, 5:57 AM

Some other possible causes: - Brent on Dec 5, 2008, 6:01 AM

Re: Some other possible causes: - Dave Walters on Dec 5, 2008, 6:11 AM

shut off ??? - byron w on Dec 5, 2008, 6:08 AM

Try unplugging the voltage regulator if it happens again - Royce on Dec 5, 2008, 6:29 AM

Small wires on the solenoid... - Scott66gta on Dec 5, 2008, 6:49 AM

Good tip Royce...thanks - Dave Walters on Dec 5, 2008, 7:39 AM

are you running MSD ? - chris on Dec 5, 2008, 7:09 AM

No MSD... - Dave Walters on Dec 5, 2008, 7:39 AM

Re: No MSD... - Bobby Spears on Dec 5, 2008, 8:22 AM

Bobby... - Dave Walters on Dec 5, 2008, 2:33 PM

Tip: Using GOOGLE to search FordFE.com on www.network54.com/Forum/74182/ URL View Thread - Pippin on Dec 4, 2008, 11:13 PM

Great Tip! It does work better. e.g. camshaft 427-306 vs 324 - WerbyFord on Dec 5, 2008, 5:24 AM

Re: Great Tip! It does work better. e.g. camshaft 427-306 vs 324 - Bobby Spears on Dec 5, 2008, 8:26 AM

I think c4ae-b was 324 (245) duration, c3a3-d was 306 (228) duration - WerbyFord on Dec 5, 2008, 9:11 AM

Re: I think c4ae-b was 324 (245) duration, c3a3-d was 306 (228) duration - Dennis on Dec 5, 2008, 10:25 AM

cams - callahan on Dec 5, 2008, 2:10 PM

wow thats cool - David Ventura on Dec 5, 2008, 8:34 AM

More General Search IN inurl:(Network54) or search excluding --inurl:(ebay|amazon) - Pippin on Dec 5, 2008, 12:52 PM

Tech question on a 390 build View Thread - blzrrod on Dec 4, 2008, 9:59 PM

Should be about 396 cubes - paul metzgar on Dec 4, 2008, 10:03 PM

397.2247934759999 - winr1 on Dec 5, 2008, 12:24 AM

LOL! Just as an approximation, round up to 397.224793476 n/m - Jay Brown on Dec 5, 2008, 4:50 AM

I got 397.72 cubes, is that just higher inflation on the west coast? - WerbyFord on Dec 5, 2008, 5:28 AM

397/8 - Terry on Dec 5, 2008, 5:59 AM

Re: Tech question on a 390 build - ford-boy on Dec 5, 2008, 6:09 AM

cubic inches - steve on Dec 5, 2008, 8:38 AM

.7854 - Joe D. Craine on Dec 5, 2008, 8:56 AM

Probably different approximations for Pi n/m - Jason on Dec 5, 2008, 8:47 AM

Re: Tech question on a 390 build - blzrrod on Dec 5, 2008, 8:50 AM

Here are a few Web-Sites that can help ya figure that out~ - Wes Adams Ford428CJ on Dec 5, 2008, 10:21 AM

397.224793476 GT - Tom P on Dec 5, 2008, 10:49 AM

Especially with some miles on it - Ross on Dec 5, 2008, 11:43 AM

I always thought it was 3.784 and 3.984 - WerbyFord on Dec 5, 2008, 12:34 PM

Yes, .784 and .984 and when - Pippin on Dec 5, 2008, 12:55 PM

You forgot.... - Bob Sprowl on Dec 5, 2008, 3:50 PM

T&D SOHC Rockers View Thread - Jay Brown on Dec 4, 2008, 8:45 PM

Does the roller have the slight... - Andy (Oz) on Dec 4, 2008, 9:55 PM

Rockers - Keith Craft on Dec 4, 2008, 10:03 PM

SOHC rockers - Keith Craft on Dec 4, 2008, 10:01 PM

Rockers - RWJ on Dec 5, 2008, 3:19 AM

OK... - Jay Brown on Dec 5, 2008, 4:47 AM

T&D SOHC Rockers - Roger Gordon on Dec 5, 2008, 4:35 AM

Checked that out tonight - Jay Brown on Dec 5, 2008, 11:00 PM

T&D makes good stuff - Royce on Dec 5, 2008, 4:55 AM

Boy, that's for sure... - Jay Brown on Dec 5, 2008, 7:27 AM

tow truck driver - Joel Nystrom on Dec 5, 2008, 8:53 AM

Cal Custom - Jay Brown on Dec 5, 2008, 9:21 AM

Looks like typical T&D good quality so far... - Mark on Dec 5, 2008, 6:53 AM

nice stuff! - Tom P on Dec 5, 2008, 10:53 AM

Thanks - they fit as good as they look... - Mark on Dec 5, 2008, 1:40 PM

Re: Looks like typical T&D good quality so far... - Anonymous on Dec 5, 2008, 11:22 AM

I had to do a touch of that as well here and there... - Mark on Dec 5, 2008, 2:02 PM

Re: I had to do a touch of that as well here and there... - Anonymous on Dec 5, 2008, 5:38 PM

I found the Doves did the job... - Mark on Dec 5, 2008, 8:23 PM

Re: I found the Doves did the job... - Anonymous on Dec 5, 2008, 9:30 PM

Sounds like a good plan re: the Ersons... - Mark on Dec 5, 2008, 9:37 PM

Afret.. tell me how you measured the - DaleP on Dec 5, 2008, 11:40 PM

Re: Afret.. tell me how you measured the - Anonymous on Dec 6, 2008, 10:11 AM

Re: T&D SOHC Rockers - steve on Dec 5, 2008, 8:14 PM

Oil Holes - Jay Brown on Dec 5, 2008, 10:57 PM

"E" code Fairlanes View Thread - Mark on Dec 4, 2008, 8:25 PM

Re: "E" code Fairlanes - Jeff Tepper on Dec 4, 2008, 9:31 PM

I remembered the 312... - Mark on Dec 4, 2008, 10:18 PM

e code fairlane - jack b fuche on Dec 4, 2008, 10:18 PM

No need to apologize Mr. Fuche. I'm sure we all enjoy reading the bits of history..... - Rod C on Dec 5, 2008, 4:31 AM

I really enjoy that, keep it coming! - Bill Ballinger on Dec 5, 2008, 5:19 AM

there is a great artice on... - Lance on Dec 5, 2008, 5:55 AM

There were W code Fairlanes and Comets in '67 - Royce on Dec 5, 2008, 6:31 AM

Thought of that, but this didn't sound like the average "R" or "W" code... - Mark on Dec 5, 2008, 6:41 AM

Ya "average "R" or "W" code..." LOL n/m - Howie on Dec 5, 2008, 6:47 AM

Agreed! HA! - Mark on Dec 5, 2008, 6:56 AM

Well I had a E code 57 Fairlane 500 with - Bobby Spears on Dec 5, 2008, 8:43 AM

Hemmings Muscle Machines - Kirk on Dec 5, 2008, 10:17 AM

Bobby - Tom P on Dec 5, 2008, 10:58 AM

Been gone a long while..... View Thread - Erik on Dec 4, 2008, 8:13 PM

First, besides nice to have you back, how in the world did - Pippin on Dec 4, 2008, 8:35 PM

Re: Been gone a long while..... - John on Dec 4, 2008, 9:55 PM

Re: Been gone a long while..... - Richard on Dec 5, 2008, 8:09 AM

diagnose with a timing light & a vacuum gauge...n/m - Dr. Mabuse on Dec 5, 2008, 2:44 PM

Thanks guys.... - Erik on Dec 6, 2008, 4:43 PM

Who is Bob, and why is he in charge of the weight? View Thread - FElony on Dec 4, 2008, 6:16 PM

generally... - Tom P on Dec 4, 2008, 6:53 PM

Factory uses one drill diameter. - Dave Shoe on Dec 4, 2008, 7:17 PM

I would say take the best looking one! - Wes Adams Ford428CJ on Dec 4, 2008, 7:59 PM

Also check the journals and make sure they~ - Wes Adams Ford428CJ on Dec 4, 2008, 8:02 PM

Crank Balance - Bill A. on Dec 4, 2008, 8:15 PM

Another thing to check that I noticed once.... - Andy (Oz) on Dec 4, 2008, 10:00 PM

I was under the impression that cranks were near zero balance and any bobweight .......... - Rod C on Dec 5, 2008, 4:39 AM

Apples and oranges. - Dave Shoe on Dec 5, 2008, 5:12 AM

Thanks Dave, I usually take the longer, scenic route, LOL......n/m - Rod C on Dec 5, 2008, 7:12 AM

That would be a pain in the butt too do Dave~ - Wes Adams Ford428CJ on Dec 5, 2008, 7:44 AM

Also you wouldn't be able to do it that way when all you need - Wes Adams Ford428CJ on Dec 5, 2008, 7:48 AM

I watched this video series of 6 - Bob C on Dec 5, 2008, 7:05 AM

They are cool BUT~ - Wes Adams Ford428CJ on Dec 5, 2008, 7:35 AM

you're right Wes - Bob C on Dec 5, 2008, 8:54 AM

LOL, My Uncle is a very talented Machinist~ - Wes Adams Ford428CJ on Dec 5, 2008, 10:09 AM

Thanks for the - FElony on Dec 5, 2008, 3:16 PM

Cross Drilled Cranks - MeanGene on Dec 6, 2008, 7:27 AM

piston i.d. View Thread - Shane on Dec 4, 2008, 6:00 PM

Re: piston i.d. - FElony on Dec 4, 2008, 6:22 PM

Welcome Shane - Howie on Dec 4, 2008, 6:28 PM

Hey Shane, I have some .030 over flat tops with 4 valve reliefs... - winr1 on Dec 4, 2008, 8:15 PM

Thanks - Anonymous on Dec 5, 2008, 9:42 AM

Tom P & Barry Byer, I posted some shots of my 56 truck,,,, View Thread - garry on Dec 4, 2008, 4:37 PM

P Code 390 - Cleveland, Ohio update View Thread - Bill Howard on Dec 4, 2008, 3:35 PM

Re: P Code 390 - Cleveland, Ohio update - mike on Dec 4, 2008, 4:47 PM

Re: 64 Galaxie XL Ragtop - Bill Howard on Dec 4, 2008, 8:23 PM

E-BAY? - KULTULZ on Dec 7, 2008, 10:08 AM

Engine info - Bill on Dec 7, 2008, 3:15 PM

PI - KULTULZ on Dec 7, 2008, 9:47 PM

Hey Ford429cjlover, here is some info for ya on powder torches View Thread - Wes Adams Ford428CJ on Dec 4, 2008, 3:28 PM

Here is some cool info~ - Wes Adams Ford428CJ on Dec 4, 2008, 4:18 PM

Thanks.... - ford429cjlover on Dec 5, 2008, 5:22 PM

09 View Thread - wayne on Dec 4, 2008, 2:55 PM

They're here, SOHC rockers, Pictures posted View Thread - Keith Craft on Dec 4, 2008, 2:45 PM

Rockers - FeWedge on Dec 4, 2008, 3:14 PM

can we see them ? - Bill Orrick on Dec 4, 2008, 3:24 PM

Re: can we see them ? - Keith Craft on Dec 4, 2008, 6:32 PM

losts of luck I cant get pictures here either . - Bill Orrick on Dec 4, 2008, 6:43 PM

Re: losts of luck I cant get pictures here either . - Keith Craft on Dec 4, 2008, 6:46 PM

Keith my Email is cammer1@yahoo.com - Bill Orrick on Dec 4, 2008, 6:57 PM

Re: losts of luck I cant get pictures here either . - Keith Craft on Dec 4, 2008, 7:48 PM

Re: They're here, SOHC rockers, Pictures posted - Anonymous on Dec 4, 2008, 7:10 PM

Re: They're here, SOHC rockers, Pictures posted - Anonymous on Dec 4, 2008, 7:11 PM

Those are pretty impressive looking. - Dave Shoe on Dec 4, 2008, 7:23 PM

Rockers - Keith Craft on Dec 4, 2008, 7:58 PM

They are sooooo nice that I feel~ - Wes Adams Ford428CJ on Dec 4, 2008, 8:06 PM

Here is a better picture of them! - Wes Adams Ford428CJ on Dec 4, 2008, 7:27 PM

Re: Here is a better picture of them! - Keith Craft on Dec 4, 2008, 7:47 PM

Re; here is better pic. - Bill Orrick on Dec 4, 2008, 8:01 PM

Found this wed site thought some of the nascar guys... View Thread - Scott on Dec 4, 2008, 2:43 PM

Way cool! Thanks..... - Bob on Dec 4, 2008, 3:43 PM

wanna see more? - Tom P on Dec 4, 2008, 7:07 PM

wanna see more - jack b fuche on Dec 4, 2008, 10:35 PM

Very cool! - Bob on Dec 5, 2008, 6:09 AM

I figured I would join in View Thread - Harry H on Dec 4, 2008, 1:51 PM

Nice Video Harry.... - Jim L on Dec 4, 2008, 10:34 PM

thanks - Harry H on Dec 4, 2008, 11:28 PM

I checked out the other video also.... - Jim L on Dec 5, 2008, 8:11 AM

its not ironed out yet - Harry H on Dec 5, 2008, 9:22 AM

FE 1960 352 HP camshaft specifications? - PART 2 View Thread - Mike on Dec 4, 2008, 10:28 AM

Are you sure about the P/N? - Wes Adams Ford428CJ on Dec 4, 2008, 11:05 AM

Yeah, pretty sure. - Mike on Dec 4, 2008, 11:23 AM

Ford Specification Info from TSB - Dennis on Dec 4, 2008, 11:23 AM

Great! - Mike on Dec 4, 2008, 11:40 AM

Re: Great! - Dennis on Dec 4, 2008, 11:57 AM

Can you post or email the 1-degree vs lift increments?! - WerbyFord on Dec 4, 2008, 2:39 PM

Pretty sure early cams were NOT measured at .050 - Beoweolf on Dec 4, 2008, 2:40 PM

Yeah,.... - Mike on Dec 4, 2008, 2:55 PM

Dennis THANK you, looks like the holy grail of TSB's - WerbyFord on Dec 4, 2008, 11:48 AM

Re: Dennis THANK you, looks like the holy grail of TSB's - Dennis on Dec 4, 2008, 12:07 PM

Mike, see my reply to Dennis. Can you ask Crane for .100" lobe? - WerbyFord on Dec 4, 2008, 11:53 AM

That aa - Dsrtfox on Dec 4, 2008, 12:52 PM

352 cam - mike on Dec 4, 2008, 1:36 PM

Service replacement cam. - RJP on Dec 4, 2008, 4:30 PM

cast iron repair View Thread - Tom V on Dec 4, 2008, 9:42 AM

I like spray metal much better then brazing~ - Wes Adams Ford428CJ on Dec 4, 2008, 9:45 AM

any guidance as to which setup to use.... - ford429cjlover on Dec 4, 2008, 12:40 PM

It was a Victor Torch set-up~ - Wes Adams Ford428CJ on Dec 4, 2008, 3:16 PM

I Think It's Going To Break As Soon As You Torque It Down - Wreckless Warren on Dec 4, 2008, 9:54 AM

That's why the use of spray metal is the BOMB!!! - Wes Adams Ford428CJ on Dec 4, 2008, 9:59 AM

Re: That's why the use of spray metal is the BOMB!!! - Wreckless Warren on Dec 4, 2008, 10:26 AM

cast iron repair - Worth, Blaine on Dec 4, 2008, 9:55 AM

I promise you Blaine~ - Wes Adams Ford428CJ on Dec 4, 2008, 10:05 AM

cast iron welding - DEAN FORSTER on Dec 4, 2008, 11:18 AM

Silicon bronze/nickel rod is the correct form of repair. - Erik Van Vechten on Dec 4, 2008, 11:45 AM

Its not the only correct form to repair anymore~ - Wes Adams Ford428CJ on Dec 4, 2008, 12:34 PM

I had a Cleveland 4bbl exhaust manifold repaired with " spray" - Warren 390 on Dec 4, 2008, 4:18 PM

I think the company on Long Island is High Speed Salvage, they are real experts n/m - TonyS. on Dec 4, 2008, 11:52 AM

Uncle Bill - Gary B on Dec 4, 2008, 1:45 PM

I've repaired diesel cylinder heads this way - Bill Ballinger on Dec 4, 2008, 2:26 PM

cast iron repair - Oliver Barret on Dec 4, 2008, 12:04 PM

I didn't know that they used it then!!! - Wes Adams Ford428CJ on Dec 4, 2008, 12:37 PM

Wreckless Warren is correct. Brazing will not work. - Charlie on Dec 4, 2008, 12:49 PM

Re: Wreckless Warren is correct. Brazing will not work. - Anonymous on Dec 4, 2008, 1:38 PM

manifold repair - fordsel on Dec 4, 2008, 3:27 PM

Brazing - John on Dec 4, 2008, 7:16 PM

I blew a 390 engine... - KenS on Dec 4, 2008, 8:54 PM

Ken, what company was it? - Bob C on Dec 5, 2008, 5:55 AM

Although he doesn't make a big.... - KenS on Dec 5, 2008, 8:43 PM

try it out - Tom V on Dec 5, 2008, 4:10 AM

IMO, wait for it to break before spending more money, it may....... - Rod C on Dec 5, 2008, 7:21 AM

I'll let you know if a get a powder metal torch~ - Wes Adams Ford428CJ on Dec 5, 2008, 7:52 AM

brazed - Tom V on Dec 5, 2008, 9:11 AM

Stay away from the blacksmiths. - Charlie on Dec 5, 2008, 9:45 AM

Re: Stay away from the blacksmiths. - John on Dec 7, 2008, 6:20 PM

Anybody trailering something to the West Coast and View Thread - mike cannon on Dec 4, 2008, 9:28 AM

Oil Cooler View Thread - DeWayne on Dec 4, 2008, 7:55 AM

Re: Oil Cooler - blzrrod on Dec 4, 2008, 1:48 PM

A little more info... - Jim on Dec 4, 2008, 3:08 PM

an early Happy B'day to a coupla' great southern boys, View Thread - Scrap Iron on Dec 4, 2008, 7:30 AM

RIGHT ON!~ - Wes Adams Ford428CJ on Dec 4, 2008, 9:47 AM

Yeah..Happy Birthday guys and Merry Christmas !! - winr1 on Dec 4, 2008, 11:02 AM

Defining Minimum Core Shift Dimension View Thread - Oliverbarret on Dec 4, 2008, 7:27 AM

Will only...... - Bob on Dec 4, 2008, 8:24 AM

I kinda grasp your conception of core shift but..... - Hawkrod on Dec 4, 2008, 8:38 AM

Here's a pretty good - Bob on Dec 4, 2008, 8:49 AM

That is kinda ole school. By 73 when I entered MCC the cores were pre-staged/set in a.... - Rod C on Dec 4, 2008, 9:06 AM

True..... - Bob on Dec 4, 2008, 9:15 AM

The 2 main components that are involved with 'core-shift' are the Bore Cores and...... - Rod C on Dec 4, 2008, 8:51 AM

Rod, that is what I said - Hawkrod on Dec 4, 2008, 10:40 AM

Defining Minimum Core Shift Dimension - Oliver Barret on Dec 4, 2008, 12:15 PM

I was just expanding on what you had said, explaining the 2 components that can shift in.. - Rod C on Dec 5, 2008, 5:07 AM

Had my 391 block sonic checked View Thread - Mario428 on Dec 4, 2008, 5:42 AM

Will you be able to machine the block/bore if the .157 is correct?....... - Rod C on Dec 4, 2008, 7:01 AM

Going to 4.15-16 bore - Mario428 on Dec 4, 2008, 7:08 AM

How much metal are you going to remove? - Jason on Dec 4, 2008, 7:04 AM

Sounds like Mario is going .100 over~ - Wes Adams Ford428CJ on Dec 4, 2008, 9:55 AM

2x4 BBL Intake Questions View Thread - Lee Holman on Dec 4, 2008, 4:40 AM

Maybe the 427 Low Riser intake? - Royce on Dec 4, 2008, 4:55 AM

I'd go with the Blue Thunder intake - Jay Brown on Dec 4, 2008, 9:50 AM

how expensive is a - farnorth on Dec 5, 2008, 6:36 AM

Found old footage of Mustang Youtube link View Thread - Steve Engberg on Dec 3, 2008, 10:32 PM

That was so very Disturbing - Tom on Dec 4, 2008, 4:21 AM

Always one of my favorite cars but... - Ross on Dec 4, 2008, 6:34 AM

Next car - Steve Engberg on Dec 4, 2008, 8:03 AM

So.... - Bob on Dec 4, 2008, 8:13 AM

Suspension - Steve Engberg on Dec 4, 2008, 9:14 AM

I like that look too (sorry large pic) - Ross on Dec 4, 2008, 9:03 AM

now that you have the scoop, you need the engine to match? - michael on Dec 4, 2008, 9:13 AM

good thing.... - Tom P on Dec 4, 2008, 10:18 AM

Your car looks great. - Anonymous on Dec 4, 2008, 11:34 AM

Shock Towers - Steve Engberg on Dec 4, 2008, 1:16 PM

Re: Shock Towers - Anonymous on Dec 4, 2008, 1:49 PM

I will cut them :) - Ross on Dec 4, 2008, 5:12 PM

Billet Specialties Serpentine ???? - Craig Mitchell on Dec 4, 2008, 2:40 PM

Billet specialties set up - Steve Engberg on Dec 4, 2008, 8:10 PM

Now, I like that!!! Cant wait to see it in real!~ - Wes Adams Ford428CJ on Dec 4, 2008, 10:17 AM

Making Video's - Steve Engberg on Dec 4, 2008, 10:33 AM

I'll bring some old videos with me that you can have! - Wes Adams Ford428CJ on Dec 4, 2008, 10:40 AM

Sounds great - Steve Engberg on Dec 4, 2008, 11:04 AM

o/t 351w rocker arm recomendations View Thread - John on Dec 3, 2008, 9:05 PM

The - Bob on Dec 3, 2008, 9:22 PM

Talk to Paul Kane - Ross on Dec 3, 2008, 9:33 PM

Thanks - John on Dec 4, 2008, 8:41 PM

Timing question - still pinging a little View Thread - Doug on Dec 3, 2008, 8:50 PM

get a dial back timing light - Jason Engle on Dec 4, 2008, 1:14 AM

Get to know your timing. - cleandan on Dec 4, 2008, 10:58 AM

old C3AE heads in '67 Mustang FB...... View Thread - ford429cjlover on Dec 3, 2008, 7:29 PM

Any header will fit and work - Royce on Dec 3, 2008, 7:32 PM

issue with port location???? - ford429cjlover on Dec 3, 2008, 7:37 PM

No problem - Frank Bowers on Dec 3, 2008, 8:43 PM

Exhaust problem for other heads - Ross on Dec 3, 2008, 9:37 PM

I would still suggest that... - Dave Walters on Dec 4, 2008, 12:17 PM

Not a good idea - Royce on Dec 4, 2008, 12:49 PM

Intake Coating - Ceramic or Powder Coat ????? View Thread - Rick on Dec 3, 2008, 6:41 PM

powder coat intake - byron w on Dec 3, 2008, 6:52 PM

Re: powder coat intake - Rick on Dec 3, 2008, 7:02 PM

powder coat questions - byron w on Dec 3, 2008, 7:17 PM

Must be sans heat riser or ports are blocked? - Beoweolf on Dec 4, 2008, 2:47 PM

Hot coat - tony427s on Dec 3, 2008, 7:11 PM

DONT USE JET HOT!! - 427Howard on Dec 3, 2008, 7:26 PM

powdercat no problems - Harry H on Dec 3, 2008, 7:29 PM

I tried that once - Cobrabill on Dec 3, 2008, 7:44 PM

Yeh...my cat converted! nm - Andy on Dec 3, 2008, 9:42 PM

Need a great carb Holley restoration guy in/near Michigan View Thread - Dan on Dec 3, 2008, 5:48 PM

orig carbs - 427Howard on Dec 3, 2008, 6:13 PM

Carb Restoration - Myrl Morris on Dec 4, 2008, 2:37 AM

Carbs - Dan on Dec 4, 2008, 4:07 AM

OHIO, but I've seen/heard nothing but great things about... - tom406 on Dec 3, 2008, 8:29 PM

No recommendation. But thank you - John on Dec 3, 2008, 9:20 PM

Carb work - Mike on Dec 4, 2008, 5:57 AM

Glad you are home Dan..Thanks for serving !! - winr1 on Dec 4, 2008, 11:15 AM

Anyone going to be at the Pomona swap meet this weekend? View Thread - Anonymous on Dec 3, 2008, 5:34 PM

do both - Tom P on Dec 3, 2008, 5:36 PM

Anyone going to be at the Pomona swap meet this weekend - Mike Gray on Dec 3, 2008, 6:11 PM

Think'n 'bout go'n to Force's.... - Tommy-T on Dec 3, 2008, 6:14 PM

Not to anyone that knows what your narra A looks like! - SLT on Dec 3, 2008, 7:28 PM

weekend - fakesnake.com on Dec 4, 2008, 8:26 PM

What thread sealant is best for................ View Thread - Craig Mitchell on Dec 3, 2008, 4:38 PM

I use a little liquid teflon myself~ - Wes Adams Ford428CJ on Dec 3, 2008, 4:47 PM

I use permatex 2B or Indian Gasket shellac which I - Inthegarge on Dec 3, 2008, 6:31 PM

Craig, - Don Ragan on Dec 3, 2008, 7:04 PM

Thanks to all that responded.............nm - Craig Mitchell on Dec 4, 2008, 2:42 PM

Jay Brown, need some old pics!!! View Thread - Gary on Dec 3, 2008, 4:30 PM

Here's one... - Jay Brown on Dec 3, 2008, 5:26 PM

Jack Miller? - Andreas on Dec 4, 2008, 1:37 AM

Jack's car has been in Hot Rod a few times... - Jay Brown on Dec 4, 2008, 7:48 AM

Day-am! There is no need to hunt squirrels� with a Howitzer - Beoweolf on Dec 4, 2008, 2:45 PM

427 SOHC View Thread - Randy on Dec 3, 2008, 3:56 PM

Look here... - Jay Brown on Dec 3, 2008, 5:14 PM

Dove Cammer Kits "LAW SUIT" - Roger Gordon on Dec 4, 2008, 7:44 AM

If a lawsuit has been filed, it is public information... - Jay Brown on Dec 4, 2008, 7:51 AM

Suit - RWJ on Dec 4, 2008, 4:44 PM

Are you sure about that? - Jay Brown on Dec 4, 2008, 6:53 PM

Law Suits - Roger Gordon on Dec 5, 2008, 5:14 AM

Just be careful Roger. If you are posting these these things on a public forum - Bill Ballinger on Dec 5, 2008, 5:33 AM

Kits - RWJ on Dec 5, 2008, 4:51 PM

Did everyone not know that this was going to happen - Keith Craft on Dec 6, 2008, 7:23 PM

Re: Just be careful Roger. If you are posting these these things on a public forum - Roger Gordon on Dec 6, 2008, 6:52 AM

Good deal. Our legal system has gotten screwy. - Bill Ballinger on Dec 6, 2008, 2:17 PM

Thunderbolt pictures View Thread - Dsrtfox on Dec 3, 2008, 2:57 PM

Re: Where did ya... - Tommy-T on Dec 4, 2008, 8:52 AM

Where did I what ? - Dsrtfox on Dec 4, 2008, 11:06 AM

Brain fart... - Tommy-T on Dec 4, 2008, 12:11 PM

ot but really funny View Thread - Anonymous on Dec 3, 2008, 2:11 PM

let me add my funny here - tmpass on Dec 3, 2008, 4:05 PM

Those are great! - William Conley on Dec 3, 2008, 5:00 PM

How about,,, - Tom P on Dec 3, 2008, 5:48 PM

C'mon Tom.. You could write a book - DaleP on Dec 3, 2008, 6:03 PM

Can laugh now - steve meyer on Dec 3, 2008, 7:27 PM

Many, many years ago... - BattlestarGalactic on Dec 3, 2008, 8:15 PM

OK, a few - Tom P on Dec 3, 2008, 9:39 PM

That is a ripper Larry. I remember once - Andy (Oz) on Dec 3, 2008, 10:01 PM

OK, I'll try... - Tommy-T on Dec 3, 2008, 10:43 PM

This one is FE related............... - Fred on Dec 3, 2008, 11:57 PM

are there gear timming sets for fe's View Thread - Jaymz on Dec 3, 2008, 12:51 PM

Milidon makes one - Rick on Dec 3, 2008, 1:00 PM

sweet thanks - Jaymz on Dec 3, 2008, 1:03 PM

Milodon - MeanGene on Dec 3, 2008, 1:09 PM

The 429/460 are under a different P/N then the FE's~ - Wes Adams Ford428CJ on Dec 3, 2008, 5:07 PM

why? - Don on Dec 3, 2008, 4:14 PM

dont know till you ask - Jaymz on Dec 3, 2008, 4:21 PM

I have one......do you want it? - Mark Artis on Dec 3, 2008, 5:05 PM

I don't find that true for the Milodon Gear Drives!~ - Wes Adams Ford428CJ on Dec 3, 2008, 4:26 PM

I forgot that we run one in the Blown 440 car - Wes Adams Ford428CJ on Dec 3, 2008, 4:27 PM

Noise - MeanGene on Dec 3, 2008, 5:07 PM

Gear drives - RWJ on Dec 3, 2008, 5:35 PM

I have heard the harmonics can be - DaleP on Dec 3, 2008, 6:06 PM

gear noise - Don on Dec 4, 2008, 4:34 AM

O/T A couple of questions. View Thread - ford-boy on Dec 3, 2008, 12:19 PM

Skip..... - Bob on Dec 3, 2008, 12:35 PM

Mine took - Anthony on Dec 3, 2008, 12:38 PM

Re: O/T A couple of questions. - Ray Hillebrand on Dec 3, 2008, 1:35 PM

I'm with Ray - Steve Corbin on Dec 3, 2008, 1:55 PM

I run all transmissions with the rear wheels off of the ground.... - winr1 on Dec 3, 2008, 7:00 PM

'64 Fairlane Front Coilover View Thread - chuck bell on Dec 3, 2008, 12:11 PM

Check out Fatman F'lane kit - Rick on Dec 3, 2008, 12:56 PM

Re: Check out Fatman F'lane kit - chuck bell on Dec 3, 2008, 1:45 PM

More Options from Global West - mc on Dec 3, 2008, 1:49 PM

for a 64? - kelly on Dec 3, 2008, 8:10 PM

Autocrafters - John on Dec 3, 2008, 3:27 PM

I wish AJE would make one for the Fairlane... - Larry Hampton on Dec 3, 2008, 3:58 PM

Fairlane - RWJ on Dec 3, 2008, 5:17 PM

Why buy an overpriced kit? - Scott on Dec 4, 2008, 11:28 AM

Re: Why buy an overpriced kit? - Anonymous on Dec 4, 2008, 2:04 PM

Well I'm on the other side of the country... - Scott on Dec 4, 2008, 2:31 PM

Coil overs - Larry on Dec 4, 2008, 8:36 PM

Re: Coil overs - chuck on Dec 5, 2008, 5:22 AM

How can it be cheaper to build this............. View Thread - Scott on Dec 3, 2008, 11:23 AM

brings in margin related to Ebok carbs whereas the Victor doesn't - T on Dec 3, 2008, 11:40 AM

Uses only Edelbrock carbs, no others.......n/m - Rod C on Dec 3, 2008, 11:44 AM

Who would want it??? - Dave Walters on Dec 3, 2008, 4:29 PM

Me! - Jay Brown on Dec 3, 2008, 5:10 PM

me too - Tom P on Dec 3, 2008, 6:00 PM

Would 2 Holleys fit sideways ?? - winr1 on Dec 3, 2008, 7:02 PM

Might Fit, but won't work since it.. - DaleP on Dec 3, 2008, 8:50 PM

Tom........~ - Wes Adams Ford428CJ on Dec 3, 2008, 7:49 PM

About 15 years ago.... - KenS on Dec 3, 2008, 8:43 PM

Well I would buy one if you could....... - Scott on Dec 4, 2008, 8:29 AM

I wonder if a pair of these would work? - Bill Ballinger on Dec 4, 2008, 5:34 AM

Proven performance!... - Dr. Mabuse on Dec 4, 2008, 7:08 PM

Exhaust Tips View Thread - Roger Gordon on Dec 3, 2008, 10:05 AM

C9OA is a Fairlane/Torino number. For 69 and maybe 70.....n/m - Rod C on Dec 3, 2008, 11:46 AM

Roger, I would appreciate it if you would put me in touch - Lloyd on Dec 3, 2008, 6:27 PM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Next >>

Help keep our FordFE.com forum free of banner advertising and pop-ups!