--

 Return to Index  

cam upgrade

May 20 2004 at 9:32 AM
No score for this post		   (Login jcguu)
from IP address 198.240.130.75


Response to Power Upgrades
 

Thanks for the info, Kultulz.

There is a cam listed on eBay currently

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7902076692&sspagename=STRK%3AMEWA%3AIT&rd=1

Is that a Isky cam? I also found a regrind cam from Green Bay

http://www.greenbaypartsworld.com/f430a.htm

Anybody ever tried either one of them?



 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses

  1. Performance Camshafts - KULTULZ on May 20, 2:14 PM
    1. Pistons and cranks - jc on May 20, 3:02 PM
      1. Reground Camshaft - KULTULZ on May 20, 4:45 PM
        1. Regrinding a cam is usually a clean up of the lobes........ - Theo on May 20, 5:59 PM
        2. Re: Reground Camshaft - jc on May 21, 11:39 AM
          1. Hey that's interesting.......... - Theo on May 21, 1:26 PM
          2. Hi JC - Anonymous on May 21, 3:57 PM
            1. Re: Hi JC - jc on May 21, 6:47 PM
            2. Honing Plates - KULTULZ on May 22, 7:39 AM
              1. These odd honing plates would probably cost a $... - Theo on May 22, 2:45 PM
                1. Cost of Plates - KULTULZ on May 22, 3:07 PM
                  1. Oh, torque plates are essential.... - Theo on May 22, 3:14 PM
            3. Re: Hi JC - jc on May 24, 8:10 PM
              1. Hi JC - JL on May 26, 6:39 AM
                1. Re: Hi JC - jc on May 27, 11:45 AM
     
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum