Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 17 Visitors
gt350hr, machoneman, tinman351, 14 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

OT - Ford Fan Sites Attacked by Ford! View Thread - Keith Hartley on Dec 9, 2008, 10:43 PM

Watching that thread closely... 45pages in 13 hrs! - blizz on Dec 10, 2008, 8:30 AM

This has been happening for a long time - Ben Sinclair on Dec 10, 2008, 9:52 AM

fords brand names - Miller Mylan on Dec 10, 2008, 11:11 AM

Funny thing, look who's ads pop up when you read a Ford Related post. - blizz on Dec 10, 2008, 11:22 AM

update - Falcon67 on Dec 10, 2008, 12:54 PM

The issue has been resolved! - Keith Hartley on Dec 10, 2008, 2:12 PM

Maximizing 2V motor View Thread - Mion on Dec 8, 2008, 12:37 PM

'66 Fairlane 12.28's while rowing a 4spd with a 2V 351C, sounds like fun!! - blizz on Dec 8, 2008, 12:50 PM

Re: '66 Fairlane 12.28's while rowing a 4spd with a 2V 351C, sounds like fun!! - Mion on Dec 8, 2008, 1:57 PM

How are you trying to post the vid? - Tom Custom on Dec 8, 2008, 3:05 PM

more cam - clevochild on Dec 8, 2008, 2:05 PM

Re: more cam - Mion on Dec 8, 2008, 5:45 PM

Re: Maximizing 2V motor - clevochild on Dec 10, 2008, 1:07 PM

tuning - Miller Mylan on Dec 8, 2008, 2:29 PM

Re: tuning - Anonymous on Dec 8, 2008, 4:43 PM

Re: Maximizing 2V motor - Anonymous on Dec 8, 2008, 3:48 PM

Re: Maximizing 2V motor - wydendorf on Dec 8, 2008, 4:53 PM

Re: Maximizing 2V motor - Mion on Dec 8, 2008, 6:43 PM

NICE CAR! - Jim on Dec 8, 2008, 8:32 PM

What clutch? - Bruce on Dec 8, 2008, 8:43 PM

Re: What clutch? - Mion on Dec 9, 2008, 2:13 PM

Re: What clutch? - wydendorf on Dec 9, 2008, 5:54 PM

Clutch - Miller Mylan on Dec 9, 2008, 7:13 PM

Re: Clutch - Mion on Dec 9, 2008, 8:09 PM

Jon Kaase's EM winning 400 in Winter 2008 Engine Masters Magazine. View Thread - Mark Miller on Dec 8, 2008, 9:52 PM

yes...great job again. - Brad Ford on Dec 9, 2008, 5:35 AM

Bout time! - xafalcongs on Dec 9, 2008, 5:19 PM

PHR - Falcon67 on Dec 10, 2008, 12:23 PM

video of 275 1/8 race Nov. View Thread - James Willett on Dec 8, 2008, 4:43 PM

nice vid...car sounds GREAT - duke on Dec 8, 2008, 8:28 PM

275 class - James Willett on Dec 10, 2008, 6:00 AM

351X cam selection time View Thread - Kevin Black on Nov 24, 2008, 9:09 AM

Re: 351X cam selection time - Anonymous on Nov 24, 2008, 9:40 AM

Re: 351X cam selection time - Kevin Black on Nov 24, 2008, 6:51 PM

I'll give it a shot.... - Randy on Nov 24, 2008, 7:03 PM

While I was at it.......... - Monty Fountain on Nov 25, 2008, 4:49 PM

Crane part #528511 - George Pence on Nov 24, 2008, 10:03 PM

Crane pick - Dan on Nov 24, 2008, 10:23 PM

Re: Crane pick - Kevin Black on Nov 24, 2008, 10:51 PM

pick - Dan on Nov 25, 2008, 7:51 AM

Reed response - Kevin Black on Nov 25, 2008, 8:00 AM

Re: Reed response - Dan Jones on Nov 25, 2008, 10:06 AM

Re: Reed response - Kevin Black on Nov 25, 2008, 12:40 PM

Per your original post.... - Randy on Nov 25, 2008, 2:59 PM

Tried 112 lsa with previous lobes - Monty Fountain on Nov 25, 2008, 3:27 PM

Engine Analyzer Pro results - Monty Fountain on Nov 25, 2008, 3:02 PM

header size - Dan on Nov 25, 2008, 5:19 PM

Primary change,,,,,,,ID or OD??? - Monty Fountain on Nov 25, 2008, 6:47 PM

old recomend - Dan on Nov 25, 2008, 4:51 PM

Re: old recomend - Kevin Black on Nov 25, 2008, 7:33 PM

Bump - Kevin Black on Nov 27, 2008, 10:40 AM

1.73s - Monty Fountain on Nov 27, 2008, 7:17 PM

Re: 1.73s - Kevin Black on Nov 29, 2008, 7:58 AM

Re: 1.73s - Monty Fountain on Nov 29, 2008, 12:39 PM

Re: 1.73s - Kevin Black on Nov 29, 2008, 1:19 PM

Re: 1.73s - Monty Fountain on Nov 29, 2008, 2:24 PM

Boss 302 cams - Kevin Black on Dec 3, 2008, 6:09 AM

Re: Boss 302 cams - Monty Fountain on Dec 3, 2008, 4:57 PM

Re: Boss 302 cams - Kevin Black on Dec 3, 2008, 8:11 PM

Roush recommended BOSS302 cam - duke on Dec 3, 2008, 8:36 PM

Bullet Rec's - Kevin Black on Dec 4, 2008, 10:03 AM

Reed Cam Lobe Catalog - DaveMcLain on Dec 4, 2008, 10:57 AM

Then and now - Danny Wilson on Dec 4, 2008, 12:33 PM

Reed Cams Heads - DaveMcLain on Dec 4, 2008, 1:23 PM

It's interesting..... - Randy on Dec 5, 2008, 7:44 AM

Duke... - Randy on Dec 5, 2008, 7:59 AM

Thanks Randy - duke on Dec 5, 2008, 5:07 PM

Duke... - Tater on Dec 6, 2008, 6:44 PM

hey kids-collect them all! - duke on Dec 6, 2008, 8:00 PM

EFI Manifold Pictures - Kevin Black on Dec 10, 2008, 5:58 AM

Leakdown View Thread - Ged on Dec 7, 2008, 6:10 AM

Re: Leakdown - kidv on Dec 7, 2008, 7:43 AM

What's important is the ... - Randy on Dec 9, 2008, 8:39 PM

Leak done at operating temp? - Roo on Dec 7, 2008, 9:34 AM

Re: Leak done at operating temp? - Ged on Dec 8, 2008, 1:32 PM

Re: Leakdown - Adam on Dec 8, 2008, 2:24 AM

Re: Leakdown - Craig on Dec 8, 2008, 7:57 PM

Couple of video's just before it blew View Thread - Tony on Dec 8, 2008, 9:38 PM

I hope you had a bit of fun with it, before it blowed up - Roo on Dec 8, 2008, 10:38 PM

Re: I hope you had a bit of fun with it, before it blowed up - Tony on Dec 9, 2008, 6:54 AM

Breakin Always sucks - DragBoss on Dec 9, 2008, 7:23 PM

Re: Breakin Always sucks - Tony on Dec 9, 2008, 7:28 PM

clevor pistons View Thread - fatfordboss on Dec 8, 2008, 7:08 PM

Re: clevor pistons - James on Dec 8, 2008, 7:36 PM

Re: clevor pistons - fatfordboss on Dec 8, 2008, 7:47 PM

clevor comments - duke on Dec 8, 2008, 7:57 PM

Re: clevor comments - fatfordboss on Dec 8, 2008, 8:48 PM

Winkmeister.... View Thread - Bruce on Dec 7, 2008, 3:15 PM

with christmas around the bend - joe on Dec 7, 2008, 3:26 PM

Joe...All I need to do is go to my... - Bruce on Dec 8, 2008, 8:00 PM

Re: Winkmeister.... - wydendorf on Dec 7, 2008, 5:39 PM

rocker stud boss tool View Thread - fatfordboss on Dec 5, 2008, 7:38 PM

Re: rocker stud boss tool - James on Dec 5, 2008, 10:03 PM

Re: rocker stud boss tool - Anonymous on Dec 6, 2008, 8:19 AM

GOODSON - duke on Dec 6, 2008, 8:41 AM

Re: GOODSON - fatfordboss on Dec 6, 2008, 11:05 AM

Re: GOODSON.com - 70TooMach on Dec 6, 2008, 12:56 PM

Goodson.com - 70TooMach on Dec 6, 2008, 1:58 PM

Re: Goodson.com - fatfordboss on Dec 6, 2008, 6:59 PM

Goodson kit - Dan on Dec 6, 2008, 8:21 PM

Re: Goodson kit - fatfordboss on Dec 6, 2008, 10:02 PM

tool - john on Dec 8, 2008, 4:26 AM

Johns right - cmf60 on Dec 8, 2008, 12:37 PM

right - Dan on Dec 8, 2008, 1:41 PM

Re: right - 70TooMach on Dec 8, 2008, 2:16 PM

Re: right - fatfordboss on Dec 8, 2008, 2:29 PM

Where are you? Someone might know a good shop. n/m - Tom Custom on Dec 8, 2008, 3:02 PM

Re: Where are you? Someone might know a good shop. n/m - fatfordboss on Dec 8, 2008, 6:52 PM

Parker Intake from ProComp?? View Thread - Tater on Dec 6, 2008, 5:18 PM

Currency exchange - Jim Sams on Dec 6, 2008, 5:26 PM

garbage - russell on Dec 6, 2008, 5:50 PM

that's no funnelweb - duke on Dec 6, 2008, 6:01 PM

duke, how does PC get away with it? - Roo on Dec 6, 2008, 6:43 PM

intake - Miller Mylan on Dec 7, 2008, 9:04 PM

Stear clear.... - Bruce on Dec 6, 2008, 6:10 PM

Warning Taken! - Tater on Dec 6, 2008, 6:35 PM

Warning Taken! - ZZ28 on Dec 7, 2008, 6:23 AM

when are you - Dan on Dec 7, 2008, 10:12 AM

when are you - ZZ28 on Dec 7, 2008, 10:32 AM

Parker Intake from ProComp?? - ZZ28 on Dec 7, 2008, 10:56 AM

Here is the link - Jim Sams on Dec 7, 2008, 2:36 PM

Procomp did what they do with all... - Bruce on Dec 7, 2008, 12:32 PM

ProComp did what theydo with all.... - ZZ28 on Dec 7, 2008, 1:15 PM

pro comp junk - bosssquad on Dec 7, 2008, 5:59 PM

pro comp junk - ZZ28 on Dec 7, 2008, 8:03 PM

Manifolds delivered to me - machstang70 on Dec 7, 2008, 8:33 PM

Re: pro comp junk - bosssquad on Dec 8, 2008, 4:08 PM

Sounds like bait and switch. - Tom Custom on Dec 8, 2008, 5:20 PM

Parker intakes - Falcon67 on Dec 7, 2008, 8:29 PM

Re: Parker Intake from ProComp?? - Anonymous on Dec 8, 2008, 3:49 PM

PC defenders - Dan on Dec 8, 2008, 5:46 PM

Who Ordered one of these in the last couple days?... - Bruce on Dec 8, 2008, 5:07 PM

Old School Cleveland View Thread - James Willett on Dec 5, 2008, 6:31 AM

Hmmm. Has that intake been shortened? - Tom Custom on Dec 5, 2008, 6:53 AM

Mustang Illustrated magazine fall 1987 issue.. - Randy on Dec 5, 2008, 7:38 AM

NHRA Pro Stock Circa 1974-75 - wydendorf on Dec 5, 2008, 8:28 AM

cool, I'd love to add it to the Cool Carz WiKi page - blizz on Dec 5, 2008, 8:09 AM

Its Sound Great!! - James Willett on Dec 5, 2008, 9:04 AM

I distinctly remember that car. I think the chassis was� - Chad on Dec 5, 2008, 10:14 AM

one nice II - Miller Mylan on Dec 5, 2008, 10:41 AM

Re: one nice II - coupe3w on Dec 8, 2008, 1:47 PM

about oil pumps View Thread - joe on Nov 28, 2008, 2:44 PM

medium volume pump, 90lb spring . n/m - joe on Nov 28, 2008, 2:46 PM

HV pump, Moroso spring - kidv on Nov 28, 2008, 2:53 PM

HV with the std spring - Roo on Nov 28, 2008, 3:09 PM

high volume - wydendorf on Nov 28, 2008, 3:21 PM

HV - tinman on Nov 28, 2008, 5:02 PM

HV Melling stock pan 6 liters 15 40 - Brad Smith on Nov 28, 2008, 7:12 PM

High volume, standard spring. - clevelandstyle on Nov 28, 2008, 7:41 PM

HV pump, plugged internal bypass, peterson remote bypass @ 80psi - Nathan on Nov 28, 2008, 7:53 PM

HV std. spring race/ Std std spring street - Dan on Nov 28, 2008, 8:03 PM

HV no mods - duke on Nov 28, 2008, 9:07 PM

Hi Vol Pump, std. spring, 8qt pan, N/M - Tom L. on Nov 28, 2008, 9:54 PM

Re: Hi Vol Pump, std. spring, 8qt pan, N/M - Butch on Nov 28, 2008, 10:07 PM

Hi Vol - cmf60 on Nov 28, 2008, 10:23 PM

stand alone - lawrence coppola on Nov 28, 2008, 11:11 PM

Re: stand alone - cmf60 on Nov 29, 2008, 6:56 AM

shhhhh no debating please - joe on Nov 29, 2008, 9:26 AM

HV no mods n/m - mike on Nov 29, 2008, 9:14 AM

High Volume Standard Spring Stock Pan Xtra Qt. Oil - Brian Guggenmos on Nov 29, 2008, 9:25 AM

high volume/high pressure spring - Fordwiser on Nov 29, 2008, 11:13 AM

Kindly put you pump description in your message header - Roo on Nov 29, 2008, 12:08 PM

HV pump, standard spring, 8litre sump - Adam on Nov 29, 2008, 1:12 PM

Melling HV, stock spring for street, 8qt pan - James on Nov 29, 2008, 3:54 PM

STD w/ bushed lifter bores/ HV & restrictor kit on unbushed - machstang70 on Nov 29, 2008, 8:09 PM

Melling HV, Melling supplied spring - Falcon67 on Nov 29, 2008, 10:30 PM

HV Pump, Standard Spring - Ged on Nov 30, 2008, 6:34 AM

about oil pumps - Milo Ziemer on Nov 30, 2008, 8:57 AM

melling hv std spring - 87boss351 on Nov 30, 2008, 10:01 AM

Standard Volume 100psi spring 10 litre sump with baffles - clevochild on Nov 30, 2008, 4:27 PM

Melling HV/ 9 qt pan - DragBoss on Nov 30, 2008, 4:59 PM

Tim, what kit? - Cory on Nov 30, 2008, 8:22 PM

link - Tom Custom on Nov 30, 2008, 8:58 PM

Thanks Tom n/m!!!!!!! - Cory on Nov 30, 2008, 11:10 PM

HV Melling (stock spring), left bank restricted, 8qt sump - dave on Dec 1, 2008, 6:49 AM

Melling std vol, shimmed stock spring, 7qt front sump - howierd on Dec 1, 2008, 9:16 AM

Melling STD Volume Pump Blueprinted w/High Pressure Spring - Chad on Dec 1, 2008, 12:07 PM

STD w/ hp spring... - Randy on Dec 1, 2008, 4:42 PM

Hi-Volume Melling....no other modifications - James P. on Dec 1, 2008, 1:08 PM

HV, 100psi spring - Bryan Mappin on Dec 1, 2008, 1:25 PM

Melling HV, stock supplied spring. - danford1 on Dec 1, 2008, 1:52 PM

Re: Pump - Anonymous on Dec 1, 2008, 3:19 PM

Pump - Miller Mylan on Dec 1, 2008, 3:21 PM

Titan variable pressure With Custom Moroso full kick out pan - Bruce on Dec 1, 2008, 5:15 PM

Melling H-V pump and spring , P.N. M-84-AHV. Also... - Danny Wilson on Dec 1, 2008, 8:20 PM

What's the MME take on this? - machstang70 on Dec 4, 2008, 5:27 PM

High volume, Std. spring, 7 qt. pan with baffles. - Douglas Brown on Dec 4, 2008, 8:12 PM

Different pumps - Mark McKeown on Dec 5, 2008, 3:24 PM

Different pumps - ZZ28 on Dec 7, 2008, 6:14 AM

Re: Different pumps - Mark McKeown on Dec 8, 2008, 8:49 AM

351c alternator brackets for electric water pump View Thread - bosssquad on Dec 5, 2008, 8:59 AM

Pics of Meziere H2O pump - DragBoss on Dec 7, 2008, 9:23 AM

Meziere pump? - xafalcongs on Dec 7, 2008, 10:58 AM

Meizere.com - DragBoss on Dec 7, 2008, 12:14 PM

Ouch! 84 bucks for a flat piece of aluminum with some holes... - blizz on Dec 7, 2008, 2:27 PM

Blizz - DragBoss on Dec 7, 2008, 3:01 PM

electric water pump - Jerry on Dec 7, 2008, 3:00 PM

Re: 351c alternator brackets for electric water pump - bosssuad on Dec 7, 2008, 5:47 PM

Rear Main Seal Repair View Thread - hawkxr7 on Dec 6, 2008, 10:34 AM

car? - kidv on Dec 6, 2008, 11:15 AM

stroker crank?? - russell on Dec 6, 2008, 5:52 PM

1970 Mercury Cougar - Hawkxr7 on Dec 6, 2008, 6:29 PM

I did it in my Mach I - J. E. Thatcher on Dec 6, 2008, 8:41 PM

rear seal - Miller Mylan on Dec 6, 2008, 9:57 PM

rear seal - Miller Mylan on Dec 6, 2008, 9:59 PM

rear main leak. - dave on Dec 7, 2008, 7:22 AM

Re: rear main leak. - kidv on Dec 7, 2008, 7:37 AM

rope seal vs. rubber - Bryan Mappin on Dec 7, 2008, 8:28 AM

Great info - Hawkxr7 on Dec 7, 2008, 4:00 PM

Are the piston pins offset on a 400? View Thread - Dustin Rinne on Nov 28, 2008, 7:03 PM

offset - Dan on Nov 28, 2008, 8:06 PM

How much?? - Dustin Rinne on Nov 28, 2008, 8:15 PM

offset - tinman on Nov 28, 2008, 8:29 PM

Re: offset - James on Nov 29, 2008, 3:49 PM

piston offset - Bryan Mappin on Dec 7, 2008, 8:43 AM

Re: How much?? - Roo on Nov 28, 2008, 8:58 PM

Holley Strip Dominator Flange Size Wanted? View Thread - Vic on Dec 6, 2008, 6:31 AM

Holley Strip Dommy - blizz on Dec 6, 2008, 12:21 PM

Re: Holley Strip Dominator Flange Size Wanted? - Roo on Dec 6, 2008, 12:44 PM

Looking at Options...... - Vic on Dec 6, 2008, 12:59 PM

Re: Looking at Options...... - tinman on Dec 6, 2008, 2:29 PM

Engine Specs Tinman - Vic on Dec 6, 2008, 9:29 PM

Yes, the Dommy has provisions to accept a spreadbore - Lenny on Dec 6, 2008, 2:18 PM

4300 to Holley - tinman on Dec 6, 2008, 2:33 PM

Carby Plate Man - Roo on Dec 6, 2008, 4:04 PM

strip dominator - john on Dec 7, 2008, 3:09 AM

news back from the machine shop.... View Thread - mike on Dec 3, 2008, 7:27 PM

What about another block? - Tom Custom on Dec 3, 2008, 7:37 PM

my first thought too - tinman on Dec 4, 2008, 7:54 PM

decesions - Tony Marbury on Dec 4, 2008, 8:07 PM

news bacl from the machine shop - ZZ28 on Dec 5, 2008, 4:31 AM

Wouldn't rebore whole block... - James P. on Dec 5, 2008, 6:50 AM

why bore it? - Jerry on Dec 5, 2008, 10:05 AM

Re: why bore it? - 70TooMach on Dec 5, 2008, 10:57 AM

Sleeving - DaveMcLain on Dec 5, 2008, 2:50 PM

More pix of 400 4V intake View Thread - Tom Custom on Mar 30, 2006, 12:34 PM

Foundry? - c on Mar 30, 2006, 1:23 PM

FWT - Bill on Mar 30, 2006, 7:12 PM

FWT is..... - Randy on Dec 4, 2008, 7:59 AM

About the foundry ? - Danny Wilson on Dec 3, 2008, 1:36 PM

$ signs - glen on Mar 30, 2006, 2:57 PM

me too n/m - Fordmech on Mar 30, 2006, 3:08 PM

Fixed. Pix for all to seeeee. - Tom Custom on Mar 30, 2006, 4:16 PM

Good Pics!!!! - Glenn on Mar 30, 2006, 4:20 PM

4V 400 intake - Miller Mylan on Dec 2, 2008, 11:40 PM

The Story I Heard - DaveMcLain on Dec 3, 2008, 3:46 PM

duplicate copies - tinman on Dec 3, 2008, 5:13 PM

Triplicate copies... Been on the WIKI since Nov 18 2007 - blizz on Dec 3, 2008, 6:18 PM

Interesting - Miller Mylan on Dec 3, 2008, 10:56 PM

Re: Interesting - Mylan Miller on Dec 3, 2008, 11:09 PM

Off topic. 2009 F150 truck vs Dodge, Chevy & Toyota View Thread - danford1 on Dec 2, 2008, 4:28 PM

Re: Off topic. 2009 F150 truck vs Dodge, Chevy & Toyota - Miller Mylan on Dec 2, 2008, 11:46 PM

Re: Off topic. 2009 F150 truck vs Dodge, Chevy & Toyota - Dustin Rinne on Dec 3, 2008, 11:06 AM

Cheering for the home team - Mike on Dec 4, 2008, 4:22 AM

Re: Cheering for the home team - Roger on Dec 4, 2008, 5:52 AM

<< Prev

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net