Clevelands Forever!
351Cleveland.net

This forum is for the discussion of the US Ford 351 Cleveland, 351M (MODIFIED), 400 and Aussie 302C and 351C engines.

POST MESSAGE___ SEARCH___ CLASSIFIED ADS___ PHOTOS

USEFUL LINKS___ GUITAR AMPS___THE BENCH___MEMBERSHIP

The Cleveland Wiki NEW!

This forum requires membership for posting messages. Anyone can read, but you will have to be a member to post. For instructions on how to apply for membership, go here. It's easy and free!

Info on the New Tod Buttermore Cleveland Block

Visitors in this forum in the last 10 minutes: 15 Visitors
gt350hr, machoneman, tinman351, 12 guests

Not logged in | Login | Create Account

Search "Engine Build Forum" Post now!

351c-400 View Thread - Chris Berndt on Jul 5, 2008, 10:53 AM

They Will Work - denny on Jul 5, 2008, 10:56 AM

Re: They Will Work - Chris Berndt on Jul 5, 2008, 10:59 AM

Re: They Will Work - denny on Jul 5, 2008, 11:01 AM

Re: 351c-400 - Anonymous on Jul 5, 2008, 11:04 AM

Re: 351c-400 - Chris Berndt on Jul 5, 2008, 11:06 AM

Yes, same chain set, too. - Tom Custom on Jul 5, 2008, 12:27 PM

Holy Crap! Kidv is in the news! View Thread - Tom Custom on Jul 3, 2008, 7:47 PM

shit, now every time Kid posts here... - blizzard on Jul 3, 2008, 8:43 PM

Hey Kid, You Have My Vote ! .............. n/m - danford1 on Jul 3, 2008, 10:59 PM

Re: shit, now every time Kid posts here... - kidv on Jul 4, 2008, 5:34 AM

Re: shit, now every time Kid posts here... - Butch on Jul 4, 2008, 9:48 AM

Hey, yea, fairness doctrine, man. - bopper on Jul 4, 2008, 8:50 AM

Re: Hey, yea, fairness doctrine, man. - blizzard on Jul 4, 2008, 11:36 AM

Disbanded by Reagan. But if your Camaro has a Cleveland... - Tom Custom on Jul 4, 2008, 12:25 PM

Crickey! - Fordmech on Jul 5, 2008, 6:22 AM

Where can I get a bumper sticker? n/m - Mike on Jul 5, 2008, 9:17 AM

Fordmech - Chris Berndt on Jul 5, 2008, 10:57 AM

Happy 4th everyone! View Thread - Bruce on Jul 4, 2008, 2:29 PM

Another "First" for me at the dragstrip View Thread - danford1 on Jul 2, 2008, 9:21 PM

Re: Another "First" for me at the dragstrip - Steve on Jul 3, 2008, 7:09 AM

Re: Another "First" for me at the dragstrip - Butch on Jul 3, 2008, 9:02 AM

I'm confident I found and fixed the problem. - danford1 on Jul 3, 2008, 9:39 AM

Got me a tow truck too! - Adrian351 on Jul 3, 2008, 11:10 AM

Yes - danford1 on Jul 3, 2008, 10:52 PM

Good diagnosis - Earl Nagle on Jul 3, 2008, 5:57 PM

Keep racing...there's LOTS of "firsts"...lol - Bruce on Jul 3, 2008, 7:03 PM

Yes I did... - danford1 on Jul 3, 2008, 10:38 PM

Roller hydraulic v's non roller hydraulic View Thread - Steve on Jul 1, 2008, 2:50 PM

Re: Roller hydraulic v's non roller hydraulic - Anonymous on Jul 1, 2008, 3:25 PM

Re: Roller hydraulic v's non roller hydraulic - cmf60 on Jul 1, 2008, 3:29 PM

Re: Roller hydraulic v's non roller hydraulic - Butch on Jul 1, 2008, 7:26 PM

hydraulic roller - Chris W on Jul 2, 2008, 5:19 AM

rollllllerrrrrrrr - kiltboy on Jul 2, 2008, 5:30 AM

Re: rollllllerrrrrrrr - cmf60 on Jul 2, 2008, 5:58 AM

roller lifter/bar type - Chris W on Jul 2, 2008, 7:57 AM

Good info cheers guys!! - Steve on Jul 2, 2008, 8:22 AM

Crane $449.95 - Butch on Jul 2, 2008, 2:12 PM

Thanks again! - steve on Jul 3, 2008, 12:46 AM

Re: Good info cheers guys!! - cmf60 on Jul 2, 2008, 3:29 PM

good info thanks - steve on Jul 3, 2008, 1:31 AM

Saw No Difference In 6000rpm engine - DaveMcLain on Jul 3, 2008, 6:43 AM

Re: Saw No Difference In 6000rpm engine - Steve on Jul 3, 2008, 7:02 AM

Re: Saw No Difference In 6000rpm engine - Dan Jones on Jul 3, 2008, 8:54 AM

What about the Doug Herbert roller lifters? They are $209.99 - danford1 on Jul 3, 2008, 9:58 AM

I had a Chet Herbert roller... - Jimmie Phillips on Jul 3, 2008, 8:48 PM

Re: Saw No Difference In 6000rpm engine - Dustin Rinne on Jul 3, 2008, 10:26 AM

Re: Saw No Difference In 6000rpm engine - steve on Jul 3, 2008, 1:40 PM

Re: Saw No Difference In 6000rpm engine - cmf60 on Jul 3, 2008, 5:47 PM

Block to be displayed View Thread - Tod on Jun 21, 2008, 6:18 AM

Re: Block to be displayed - tinman on Jun 21, 2008, 10:44 AM

Re: Block to be displayed - Anonymous on Jun 21, 2008, 10:46 AM

deck height - Dan on Jun 21, 2008, 12:38 PM

iron block - Kaz on Jun 21, 2008, 6:39 PM

PIX! Pix of Tod's iron block - Tom Custom on Jun 23, 2008, 4:39 PM

It almost looks die cast - joe on Jun 23, 2008, 7:31 PM

That is - Earl Nagle on Jul 3, 2008, 5:53 PM

Re: Block to be displayed - Anonymous on Jun 23, 2008, 5:43 PM

Re: Block to be displayed - Butch on Jun 23, 2008, 7:10 PM

what to do...??? - Kaz on Jun 26, 2008, 8:53 AM

Vets are cheaper than dentists - Roo on Jun 26, 2008, 9:48 AM

they offered to give me a root canal once - joe on Jun 26, 2008, 12:37 PM

For your tooth - DragBoss on Jun 26, 2008, 2:40 PM

Tod,Did you have the block on display Sunday at Quakercity. - Mark Miller on Jun 26, 2008, 9:02 PM

Any Plans - Tom in Vegas on Jun 26, 2008, 9:14 PM

Not yet. - Tod on Jun 27, 2008, 3:18 AM

What are the holes in the back of the block? - Jim on Jun 28, 2008, 8:04 PM

Freeze plugs. - Tod on Jun 29, 2008, 4:05 AM

PRI Space donated - Barry R on Jun 30, 2008, 7:02 AM

That's a tough one. - Tod on Jun 30, 2008, 6:27 PM

Yep. - Tod on Jun 27, 2008, 3:17 AM

Tod,My best pass was a 11.56 at 114 mph in the 1/4 mile with a crap 1.737 - Mark Miller on Jun 27, 2008, 10:05 PM

It is in - Tom in Vegas on Jun 29, 2008, 3:05 PM

I'll have to talk to John. - Tod on Jun 30, 2008, 6:28 PM

Forged crank with Windsor snout View Thread - Keith on Jul 2, 2008, 10:06 AM

Try Engineproparts.com - Lowell on Jul 2, 2008, 10:41 AM

Bruce and I went through this - shaneus on Jul 2, 2008, 2:12 PM

Key word is "were" - Keith on Jul 2, 2008, 2:45 PM

Re: Key word is "were" - Butch on Jul 2, 2008, 4:00 PM

FE lower gear - Dan on Jul 2, 2008, 3:47 PM

Try TMI - xafalcongs on Jul 2, 2008, 2:36 PM

Balancer works..... - Bruce on Jul 2, 2008, 3:56 PM

Keith...check the flex plate/flywheel too! (fitment)... - Bruce on Jul 2, 2008, 3:57 PM

Try to find Rollmaster - RDU on Jul 2, 2008, 9:35 PM

Correct timing set for 4340 Scat Crank - Zane on Jul 3, 2008, 1:59 AM

search romac or timing set - Tony Huber on Jul 3, 2008, 3:23 AM

Thanks to All - Keith on Jul 3, 2008, 10:25 AM

Holley 725 View Thread - Paul on Jul 2, 2008, 11:47 PM

pilot bushing View Thread - mike on Jul 2, 2008, 1:50 PM

Re: pilot bushing - wydendorf on Jul 2, 2008, 2:37 PM

2 other ways - Dan on Jul 2, 2008, 3:57 PM

it's 8620 - joe on Jul 2, 2008, 4:00 PM

Re: it's 8620 - wydendorf on Jul 2, 2008, 5:58 PM

I know they screwed me one time - joe on Jul 2, 2008, 7:53 PM

OT Can Ford or GM pull a Harley? View Thread - Fordmech on Jul 2, 2008, 3:48 PM

would you buy the product ? - joe on Jul 2, 2008, 3:55 PM

Current product lines are not going to turn either - Fordmech on Jul 2, 2008, 4:58 PM

consider fuel cost - shaneus on Jul 2, 2008, 4:11 PM

Re: OT Can Ford or GM pull a Harley? - Chris Berndt on Jul 2, 2008, 4:12 PM

Maybe the stock will - Travis on Jul 2, 2008, 6:05 PM

Re: Maybe the stock will - Chris Berndt on Jul 2, 2008, 6:33 PM

Then do go to the bench - joe on Jul 2, 2008, 7:51 PM

Factory Block Bored to .040 .... Any issues??? View Thread - Steve on Jul 1, 2008, 6:01 PM

Sonic check - Chris Berndt on Jul 1, 2008, 7:05 PM

Re: Factory Block Bored to .040 .... Any issues??? - Brad Smith on Jul 1, 2008, 7:18 PM

.040/.060over - CJ on Jul 1, 2008, 7:43 PM

Re: .040/.060over - DragBoss on Jul 2, 2008, 4:53 PM

Re: .040/.060over - Anonymous on Jul 2, 2008, 6:04 PM

ACL / Hastings pistons, US distributor? View Thread - tinman on Jun 29, 2008, 6:03 PM

Really old news - Barry R on Jun 30, 2008, 6:00 AM

thanks - tinman on Jul 1, 2008, 7:11 PM

ANGLE MILLING View Thread - Steve Andrews on Jun 27, 2008, 2:33 PM

angle - Dan on Jun 27, 2008, 3:51 PM

For Closed Chamber, Why Not? - DaveMcLain on Jun 27, 2008, 4:46 PM

ANGLE MILLING - Steve Andrews on Jun 28, 2008, 6:07 AM

Thinking about It.... - DaveMcLain on Jun 28, 2008, 6:29 AM

So no one....................... - Steve Andrews on Jun 30, 2008, 1:11 PM

Usual plan - Falcon67 on Jun 30, 2008, 2:44 PM

Like Dan said - cmf60 on Jun 30, 2008, 3:03 PM

posted this before - Dan on Jun 30, 2008, 7:01 PM

DECK IS POSTED? - Steve Andrews on Jul 1, 2008, 2:08 PM

Re: DECK IS POSTED? - cmf60 on Jul 1, 2008, 2:57 PM

Spark plug help View Thread - Tony on Jul 1, 2008, 11:39 AM

AF12 would be a good plug for drag racing - Roo on Jul 1, 2008, 12:10 PM

Re: AF12 would be a good plug for drag racing - tony-can-do on Jul 1, 2008, 1:22 PM

RrrrrRrrr came out of the starter View Thread - Roo on Jun 26, 2008, 4:22 PM

gage - Mike on Jun 27, 2008, 4:01 AM

I'll go with 12, thanks! n/m - Roo on Jun 27, 2008, 10:36 AM

Sure! You'll love the starter - Mike on Jun 27, 2008, 8:05 PM

The old starter ranks up their with points and bias ply tires - Roo on Jul 1, 2008, 12:16 PM

Price check in aisle five View Thread - Dan Jones on Jun 30, 2008, 8:06 AM

hmmmm - joe on Jun 30, 2008, 12:01 PM

Re: hmmmm - cmf60 on Jun 30, 2008, 3:37 PM

aisle five - Dan on Jun 30, 2008, 6:55 PM

Re: Price check in aisle five - Dan Jones on Jul 1, 2008, 11:09 AM

3.9" stroke 351C main cranks - Dan Jones on Jul 1, 2008, 11:34 AM

thinking may have conveter problem ?? View Thread - James Willett on Jun 29, 2008, 2:49 PM

info on - Dan on Jun 29, 2008, 6:51 PM

conveter problem?? - James Willett on Jun 30, 2008, 4:54 PM

Re: thinking may have conveter problem ?? - clevelandstyle on Jun 29, 2008, 7:23 PM

my unprofessional opinion - kid vishus on Jun 30, 2008, 6:28 PM

else - Dan on Jun 30, 2008, 7:14 PM

hmmm - duke on Jun 30, 2008, 9:48 PM

weight 3350 with me same motor fresh up over winter - James Willett on Jul 1, 2008, 3:51 AM

.000 Reaction Time View Thread - Jay M on Jun 25, 2008, 2:11 PM

blizz isa lazy dumbsh@t that forgot to post your greatest moment of Glory a .000 RT - blizzard on Jun 25, 2008, 2:55 PM

Re: blizz isa lazy dumbsh@t that forgot to post your greatest moment of Glory a .000 RT - Jay M on Jun 25, 2008, 4:30 PM

.000 @12.28 sometimes even a blind squirrel finds a nut... - blizzard on Jun 25, 2008, 4:57 PM

Jay...nice job - Bruce on Jun 25, 2008, 7:58 PM

Nice pass - gerahead on Jun 26, 2008, 9:25 PM

Interstate Dragways...yep!.. - blizzard on Jun 27, 2008, 6:31 AM

downloading it how ? - joe on Jun 27, 2008, 9:33 AM

DSL... - blizzard on Jun 27, 2008, 10:55 AM

Tree'd - Falcon67 on Jun 27, 2008, 6:30 AM

Re: Tree'd - Jay M on Jun 27, 2008, 7:04 AM

For Sure - Anonymous on Jun 27, 2008, 10:49 AM

Re: For Sure - kidv on Jun 28, 2008, 4:25 AM

change of subjects.... - kidv on Jun 28, 2008, 4:36 AM

Re: change of subjects.... - Jay M on Jun 29, 2008, 8:53 PM

Here's one to chew on - Falcon67 on Jun 30, 2008, 2:42 PM

Stickers I do use - Falcon67 on Jun 30, 2008, 6:42 PM

Tire issue? - Jay M on Jun 30, 2008, 7:24 PM

Tire - Falcon67 on Jun 30, 2008, 7:59 PM

eman ? View Thread - Chris Berndt on Jun 29, 2008, 9:22 PM

Re: eman ? - redmach on Jun 30, 2008, 9:35 AM

Thank you thank you - Chris Berndt on Jun 30, 2008, 12:03 PM

Hey chris, don't toss those mounts! - chris w on Jun 30, 2008, 3:27 PM

They are safe - Chris Berndt on Jun 30, 2008, 3:32 PM

Re: They are safe - redmach on Jun 30, 2008, 4:44 PM

Open or closed heads? View Thread - Dave on Jun 30, 2008, 9:24 AM

Re: Open or closed heads? - wydendorf on Jun 30, 2008, 11:10 AM

<< Prev

18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Next >>

Clevelands Forever!351Cleveland.net

Clevelands Forever!
351Cleveland.net