DIY 036 Installing Water Diverters in a MEL 430

Post your Tips Tricks and How Tos
Post Reply
User avatar
Air Education & Training Command
Air Education & Training Command
Posts: 197
Joined: Wed 24. Dec 2008, 06:03
Gender: male
Music instruments you're playing: Acoustic Guitar ... when I was young
Location: South Jersey 08062

DIY 036 Installing Water Diverters in a MEL 430

Post by 59lincolnrag » Tue 25. Aug 2020, 11:43

block thermostats02.JPG
If you have two Block Thermostats in the engine block remove them and leave the holes empty

open hole.JPG
open hole.JPG (24.57 KiB) Viewed 2522 times

The water diverters in the MEL 430 are a press fit. You will need to remove the old ones first.

New diverters installed

To install them you need to place them in the freezer for about a half hour

Apply some lube to the engine block opening

Be sure you have the plug clocked correctly

Using a block of wood and a good size hammer carefully hammer it into place

There are several suppliers that provide the new Diverters they come in brass or aluminum. Be sure to order the correct size for your application.
2002 Lincoln Blackwood
1959 Lincoln Continental Coupe blk on blk
430 Tri-Power Super Marauder
1959 Lincoln Continental Convertible wht on wht
2006 Lincoln Town Car

Post Reply

Return to “Tutorials Tips Tricks and How To. Written By Board Members”

Who is online

Users browsing this forum: No registered users and 0 guests