PS pump stuck on crank..help!

Discussion of MEL engine related topics only.
Post Reply
DanLaRu1
Airman basic
Posts: 1
Joined: Sun 14. Apr 2019, 13:49
Gender: male
Music instruments you're playing: Guitar

PS pump stuck on crank..help!

Post by DanLaRu1 » Sun 14. Apr 2019, 13:56

Hi all,

Was trying to remove the pump the other day and it seems stuck on the crank. Removed balancer and woodfrey key fine but it’s like the sleeve on the crank is stuck. Was able to remove the cover of the pump to move it a little more. Got in about an inch away from the timing cover and the whole PS case spins around. After removing the cover, it looks like the gear inside is seized. Anyone come across this before? Pump must have run hot at some point. Tried a pulley puller but the center bolt goes too far into the crank end and I’m afraid of messing it up.

Anyone have any ideas or come across this before???

Thanks!
Dan

User avatar
srm351
Airman
Airman
Posts: 21
Joined: Thu 2. Jul 2020, 11:28
Gender: male
Music instruments you're playing: 4-string bass, bass ukulele, baritone ukulele, concert ukulele
Location: Medical Lake, WA USA

Re: PS pump stuck on crank..help!

Post by srm351 » Sat 12. Dec 2020, 14:05

Hi Dan,
I have this exact same problem, did you ever come up with a solution?

Post Reply

Return to “MEL Engine General Discussion”

Who is online

Users browsing this forum: No registered users and 4 guests