MEL Moon Polished finned Valvecovers

[MrBurnedRubber]

Here is some more good news from Moon.
**********************************************
As soon as we get them polished, we’ll e-mail all of you photo to make sure you would be satisfied.
In fact, we have local customer who wants pair, so we are going to test fit on his engine to make sure everything is good to go. We are casting 25pairs. This is probably one time offer. So far we have 19pairs committed.

We can also provide valve cover gaskets if some of you need. They are 16.50/set.

Thank you!

***********************************************'''
Best regards
Trond

[Chris Craft crazy]

Cool, can hardly wait.

[SSG_Tank]

Will these fit on a 462 or are they just for a 430 i dont want to change heads

also dose any body know of an after market manifold or an adapter to put a tri power or dual 4's on a 462

[buddy67lincoln]

Will these fit on a 462 or are they just for a 430 i dont want to change heads

also dose any body know of an after market manifold or an adapter to put a tri power or dual 4's on a 462

What you want to do is go back and read the previous 2 pages...lots of info there especially about the valve covers fitting or not fitting a 430!!! READ! I am not being rude just be resourceful! This was already covered and YES they fit both engines. If you have a question about tri power adapters (none exist) then start a new thread please. There are some for the 460 intake to fit the MEL motors. Don't ask on this thread though! We have not seen any photos yet to my knowledge of someone using one yet but maybe soon. It was discussed recently. Good luck, hope I didn't seem harsh!

[SSG_Tank]

Will these fit on a 462 or are they just for a 430 i dont want to change heads

also dose any body know of an after market manifold or an adapter to put a tri power or dual 4's on a 462

What you want to do is go back and read the previous 2 pages...lots of info there especially about the valve covers fitting or not fitting a 430!!! READ! I am not being rude just be resourceful! This was already covered and YES they fit both engines. If you have a question about tri power adapters (none exist) then start a new thread please. There are some for the 460 intake to fit the MEL motors. Don't ask on this thread though! We have not seen any photos yet to my knowledge of someone using one yet but maybe soon. It was discussed recently. Good luck, hope I didn't seem harsh!

holy crap why dont you nibble a little befor you bite my head off just figured i would kill 2 birds with one stone since it appears that only 5 people actualy use this forum on a regular basis and this site is more geared tward the 430 and mercury marauder but on the reading the full forum aint realy got time for that when you only get a half hour of internet a day (somthing to do with 12 computers for roughly 500 people on this camp) so next either just a simple yes would work or if your that anoyed just dont answer the damn question

Now how bout a Roger That Sarg and Drive The Hell On !!!

SSG Tank

[Theo]

Dan, please feel free to ask as much as you can. I try to provide an archive of knowledge that can be read. But I'm in great favor of preferably running a forum with as much conversation as possible. Don't bother not to search before posting. The archive is only a substitute just in case there is nobody in the forum to answer.
Hope to see you around.

[buddy67lincoln]

Will these fit on a 462 or are they just for a 430 i dont want to change heads

also dose any body know of an after market manifold or an adapter to put a tri power or dual 4's on a 462

What you want to do is go back and read the previous 2 pages...lots of info there especially about the valve covers fitting or not fitting a 430!!! READ! I am not being rude just be resourceful! This was already covered and YES they fit both engines. If you have a question about tri power adapters (none exist) then start a new thread please. There are some for the 460 intake to fit the MEL motors. Don't ask on this thread though! We have not seen any photos yet to my knowledge of someone using one yet but maybe soon. It was discussed recently. Good luck, hope I didn't seem harsh!

holy crap why dont you nibble a little befor you bite my head off just figured i would kill 2 birds with one stone since it appears that only 5 people actualy use this forum on a regular basis and this site is more geared tward the 430 and mercury marauder but on the reading the full forum aint realy got time for that when you only get a half hour of internet a day (somthing to do with 12 computers for roughly 500 people on this camp) so next either just a simple yes would work or if your that anoyed just dont answer the damn question

Now how bout a Roger That Sarg and Drive The Hell On !!!

SSG Tank

Relax! I was joshing you. If I had a penny for every time I repeated a question someone already asked a page earlier I'd have enough money to buy another set of covers! It does get repetitive though when you are the guy going out of your way to answer the questions and no one bothers to read a little into it and it was already answered! I was the one who went on the forum and asked myself so everyone would know for sure hoping to save everyone else time figuring it out themselves...then you don't have time to read the whole thing..so its 6 one way half dozen the other! And I was not really serious anyways but I guess I will be more gentle from now on...please forgive me. Did you notice the ??? I must have been angry

[MrBurnedRubber]

Here is an update.
Our covers are being cast just now. Half of them are cast so far.
Due to the unexpected response for these covers, Moon will make 30 sets, so those that are late, it is still a chance, as 6 sets are currently available as pr today.

Best regards
Trond
http://www.cardomain.com/ride/3216310

[buddy67lincoln]

Here is an update.
Our covers are being cast just now. Half of them are cast so far.
Due to the unexpected response for these covers, Moon will make 30 sets, so those that are late, it is still a chance, as 6 sets are currently available as pr today.

Best regards
Trond
http://www.cardomain.com/ride/3216310

Its not important but do you think they would they send you any photos? That would be neat! Thanks Trond for the update

[MrBurnedRubber]

I asked this earlier, An he said he would provide pictures when polished.

I think You ( and all the others that have "ordered" ) will have a personal mail from moon with a picture, when polished.
I will also post a picture on here soon as I have one.

Best regards
Trond