drag racing a 430 in early ford bodies

Talk about your race activities no matter what brand and type of vehicle.
Post Reply
LIL ABE 2
Airman basic
Posts: 8
Joined: Thu 17. Jan 2013, 12:23
Gender: male

drag racing a 430 in early ford bodies

Post by LIL ABE 2 » Tue 19. Mar 2013, 16:39

not sure where to post this but anyone out there building a 55 or 6 ford with a 430 should deeply consider motor set back my 55 with the front of the oil pan 1 1/2" from straight axle [ stock wheel base] has a 55% front to 45% rear weight ratio. i can't imagine now bad it would be in stock ford location fords were nose heavy from the factory. unless you only wish to burn rubber move the motor. one other item 55-6 ford have the gas tank offset to the drivers side - not good for drag racing. i removed spare tire well and mounted a 58 chevy gas tank [which is also cheaper than ford unit] which has right side offset tank fits frame well had to cut off chevy neck and replace with modified stock ford one hope to get to drags soon a few more issues to solve johnny o

User avatar
Theo
Administrator
Administrator
Posts: 1209
Joined: Sun 21. Dec 2008, 14:10
Gender: male
Location: Berlin / Potsdam in Germany
Contact:

Re: drag racing a 430 in early ford bodies

Post by Theo » Wed 27. Mar 2013, 12:36

Right place bro. Thanks for sharing ideas.
Best regards
Theo
Admin

Post Reply

Return to “Racetalk”

Who is online

Users browsing this forum: No registered users and 2 guests