Page 1 of 1

New And Used 430 Pistons

Posted: Wed 3. May 2017, 18:49
by Chris430
New set of eight STANDARD 4.3" BORE Lincoln 430 pistons with pins. I picked these up from an abandoned 64 430 build but my engine needs bored so I don't need these pistons. Although these flat tops are said to work I am choosing the Wiseco stepped piston for my build. Do your own research as to how these would work for you. PST-2182 $210 includes shipping.

20170503_200724[1].jpg
20170503_200733[1].jpg
20170503_200745[1].jpg
00v0v_6ix0AVKphKW_1200x900.jpg

Used 1960-1961 430 Pistons

Posted: Wed 3. May 2017, 19:40
by Chris430
I have 14 of these. One has water pitting. They are slightly different than 58 to 59 and completely different than 1963-1965 pistons but I cannot say for sure if they were used in 1962 engines. My new mic will be in soon and skirt measurements will taken before selling. $40 for all 14 plus shipping or $10 each and shipping.
20170503_212413[1].jpg
20170503_212428[1].jpg
20170503_212531[1].jpg
20170503_212539[1].jpg
20170503_212502[1].jpg

Re: New And Used 430 Pistons

Posted: Fri 19. May 2017, 14:47
by Shelby#18
The part number on that last photo of the pistons is a 1961 number.

Re: New And Used 430 Pistons

Posted: Sat 20. May 2017, 17:52
by Chris430
Shelby#18 wrote:
Fri 19. May 2017, 14:47
The part number on that last photo of the pistons is a 1961 number.
The same piston was used in 1960, it's casting is EDJ - B9LE-6110-A. Is this the same piston design used in 62?