MEL aluminum Valley cover project proposal

Exchange knowledge and discuss MEL engine related aftermarket engine parts like cams, rods, chains, intakes and lots more.
56vicky430
Airman basic
Posts: 13
Joined: Tue 3. Feb 2009, 11:57
Gender: male
Music instruments you're playing: none

Re: MEL aluminum Valley cover project proposal

Post by 56vicky430 » Sat 26. Sep 2009, 14:52

OK, I've gotten some email about this so I thought I would update everyone here. I'm still trying to figure out which pan to send him. Is there any one pan that will cover all years? Mines a 59 and had road draft. I wanted to put PCV back but I remember something about a hump on the old ones that interfered with putting a later pan on. For someone like myself, that's ok, I can modify the block while I have it apart but that might be problem if someone has one in a car and tries to put on on. So I need advice, what year pan I need to send him. If my 59 pan can't be used, I'm going to have to come up with one. I did speak with him so everything is still on in lieu of the right pan to work from.

Chris Craft crazy
Technical Sergeant
Technical Sergeant
Posts: 238
Joined: Fri 4. Sep 2009, 06:53
Gender: male
Music instruments you're playing: Guitar
Location: Ontario Canada

Re: MEL aluminum Valley cover project proposal

Post by Chris Craft crazy » Mon 28. Sep 2009, 16:58

Hey Rocky... as stated before... the marine valley is plain except for the distributor... but I suppose I can fill a hole too...keep me informed.
MEL Marine division... and if you thought MEL car parts were scarce....

User avatar
mrevildoer
Airman
Airman
Posts: 31
Joined: Wed 7. Oct 2009, 22:27
Gender: male
Music instruments you're playing: air guitar
Location: Bozeman, MT

Re: MEL aluminum Valley cover project proposal

Post by mrevildoer » Tue 13. Oct 2009, 14:36

A little late, I know, but i'd also like one!
Brian Kilburn

1956 International S-110 (Daily)
1963 Galaxie 500XL
1963 Comet A/Gas Vintage Drag Car w/ Hilborn Injected MEL 430

Chris Craft crazy
Technical Sergeant
Technical Sergeant
Posts: 238
Joined: Fri 4. Sep 2009, 06:53
Gender: male
Music instruments you're playing: Guitar
Location: Ontario Canada

Re: MEL aluminum Valley cover project proposal

Post by Chris Craft crazy » Tue 13. Oct 2009, 16:20

I hope this project still has some life... I would love to have one of these valley covers
MEL Marine division... and if you thought MEL car parts were scarce....

56vicky430
Airman basic
Posts: 13
Joined: Tue 3. Feb 2009, 11:57
Gender: male
Music instruments you're playing: none

Re: MEL aluminum Valley cover project proposal

Post by 56vicky430 » Thu 15. Oct 2009, 14:43

I need someone to loan me a PCV style valley cover. I have the early one, I just need one post road draft. Contact me at lear31@windstream.net for coordination.

R

Ted
Airman
Airman
Posts: 23
Joined: Sat 3. Jan 2009, 16:11
Gender: male
Location: Central Texas
Contact:

Re: MEL aluminum Valley cover project proposal

Post by Ted » Mon 26. Oct 2009, 12:14

Count me in for a valley cover also. Just email me if and when this takes place. My contact info is at http://www.eatonbalancing.com .
Thanks in advance, Ted Eaton.
Ted Eaton --- http://www.eatonbalancing.com/ --
Big Engines are quick but it's hard to beat the fun that comes from running a normally aspirated Y-Block at 8.80's and 147 mph in the quarter.

User avatar
Low58Corsair
Airman
Airman
Posts: 43
Joined: Sat 28. Nov 2009, 14:09
Gender: male
Music instruments you're playing: used to play Trumpet in Highschool
Location: Palatine, IL U.S.A.
Contact:

Re: MEL aluminum Valley cover project proposal

Post by Low58Corsair » Sat 28. Nov 2009, 14:38

I'm also interested in one of these valley pans, email me at zooter86@yahoo.com if needed, or PM me.

chucklz
Airman basic
Posts: 9
Joined: Sun 30. Aug 2009, 10:12
Gender: male

Re: MEL aluminum Valley cover project proposal

Post by chucklz » Wed 2. Dec 2009, 20:38

If you need a stock vally pan for the later models I can pull the one off of my 66 462. The project is on the back burner for another season so the engine sits in the garage lonely.

Treinarts
Airman First Class
Airman First Class
Posts: 72
Joined: Fri 23. Jan 2009, 07:56
Gender: male
Music instruments you're playing: none

Re: MEL aluminum Valley cover project proposal

Post by Treinarts » Mon 7. Dec 2009, 10:39

I sent Rocky a nice clean pcv valley pan around 10-30-09. He e-mailed me that he received it. TJR

Chris Craft crazy
Technical Sergeant
Technical Sergeant
Posts: 238
Joined: Fri 4. Sep 2009, 06:53
Gender: male
Music instruments you're playing: Guitar
Location: Ontario Canada

Re: MEL aluminum Valley cover project proposal

Post by Chris Craft crazy » Mon 7. Dec 2009, 13:37

That's awesome.... :mrgreen:
MEL Marine division... and if you thought MEL car parts were scarce....

Post Reply

Return to “MEL Engine Aftermarket Parts”

Who is online

Users browsing this forum: No registered users and 4 guests