Misc. 462 Specifications

Post Reply
66Lincoupe
Airman
Airman
Posts: 36
Joined: Mon 22. Dec 2008, 07:57

Misc. 462 Specifications

Post by 66Lincoupe » Tue 17. Mar 2009, 16:22

Theo, I can't post to general specs but here are some (I saw you already had bore and stroke, but they're here again.)

GENERAL:

Bore: 4.3800"
Stroke: 3.8300"
Compression ratio: 10.25:1
Horsepower: 340 @ 4600 RPM
Torque: 485 @ 2800 RPM

TOLERANCES:

Piston to bore: .0015" to .0021"
Piston ring end gap:.010" compression rings .015" oil rings
Wrist pin diameter: .9750"
Rod bearings: 2.5992" to 2.6001" shaft diameter .0007" to .002" clearance
Main Bearings: 2.8994" to 2.9003" shaft diameter .0008" to .0024" clearance
Thrust #3 main: .004" to .008" end play

TORQUE SPECS (lb ft):

Spark plugs: 15-20
Heads: 135-145
Intake manifold: 20-25
Exhaust manifold: 15-21
Rocker Shaft: 45-50
Rods: 40-45
Mains: 95-105
Flywheel to crankshaft: 75-85
Harmonic damper: 75-90
Last edited by 66Lincoupe on Wed 18. Mar 2009, 16:37, edited 1 time in total.

User avatar
Theo
Administrator
Administrator
Posts: 1179
Joined: Sun 21. Dec 2008, 14:10
Gender: male
Location: Berlin / Potsdam in Germany
Contact:

Re: Misc. 462 Specifications

Post by Theo » Tue 17. Mar 2009, 21:31

Yes, that section was kept locked as I wasn't sure how to handle it w/o a WIKI software. I opended it now.Please copy your post, then go to the appropriate section, create a response and paste the data into a new post of yours.
Check out my initial post, in this case in the 462 specs thread. I added a text where I announce my descision to merge the info into one single post while keeping the contributer's original post in line.
Thank you for your great contribution to the MEL Enginer Forum.
Best regards
Theo
Admin

User avatar
Theo
Administrator
Administrator
Posts: 1179
Joined: Sun 21. Dec 2008, 14:10
Gender: male
Location: Berlin / Potsdam in Germany
Contact:

Re: Misc. 462 Specifications

Post by Theo » Wed 18. Mar 2009, 02:21

All right, I've moved this post so you won't have to repost.
Thanx again.
Best regards
Theo
Admin

66Lincoupe
Airman
Airman
Posts: 36
Joined: Mon 22. Dec 2008, 07:57

Re: Misc. 462 Specifications

Post by 66Lincoupe » Wed 18. Mar 2009, 11:07

Thanks Theo!

66Lincoupe
Airman
Airman
Posts: 36
Joined: Mon 22. Dec 2008, 07:57

Re: Misc. 462 Specifications

Post by 66Lincoupe » Wed 18. Mar 2009, 11:16

Theo, I must have skipped a line on the Crankshaft specifications when I was typing these... The rod specification is incorrect, however, clearance is correct...

I will fix my original post when I get home tonight.

User avatar
Theo
Administrator
Administrator
Posts: 1179
Joined: Sun 21. Dec 2008, 14:10
Gender: male
Location: Berlin / Potsdam in Germany
Contact:

Re: Misc. 462 Specifications

Post by Theo » Thu 19. Mar 2009, 02:37

Thank you for your notification. The specs are corrected according to your latest numbers.
Best regards
Theo
Admin

Post Reply

Return to “MEL Engine Basic Specifications”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest