Page 1 of 1

Looking for advice on replacing rear main seal on 410 Edsel

Posted: Sun 17. Oct 2010, 08:10
by railroad_mechanic
I have been told that there is a neoprene rear main seal that is better than the old rope seal, and that it can be installed with a special tool without too much disassembly, maybe even with the engine still in the car by just dropping the oil pan.
can anybody advise me? Any advice would be appreciated. My email is paulsedel at comcast dot net

Regards, Paul Horgan

Re: Looking for advice on replacing rear main seal on 410 Ed

Posted: Thu 21. Oct 2010, 05:35
by edselman
Paul,
I have been told this is a better seal than the rope. Unfortunately,it's no longer available. The part number is BS30141 . Tom

Re: Looking for advice on replacing rear main seal on 410 Ed

Posted: Thu 21. Oct 2010, 08:27
by Treinarts
Rubber rear main seals pop up all the time on EBAY. TJR

Re: Looking for advice on replacing rear main seal on 410 Ed

Posted: Thu 21. Oct 2010, 13:30
by Theo
Treinarts wrote:Rubber rear main seals pop up all the time on EBAY. TJR
I wonder what brand they are. Is it home brewn stuff or does it come from one of the major manufacturers?