Hello! I have search in the Network 54 forum and here after a clue where to find a new camshaft for my -59 383 Merc. But If I have understod this right so is there no new cams out there to get, due to its different sizes of the bearings. But what camshaft will I get if I lets say order one from Kanter or Falcon?
Regards
Kid
Camshaft question
-
- Airman basic
- Posts: 4
- Joined: Mon 11. May 2009, 12:39
- Gender: male
- Music instruments you're playing: Guitar and drums
Re: Camshaft question
Correct, cam bearing sizes and cam drive were changed in 1961.
Your easiest way out is to contact- -OREGON CAM GRINDING- and talk with him (very knowledgeable). He can regrind anything you want.
Your easiest way out is to contact- -OREGON CAM GRINDING- and talk with him (very knowledgeable). He can regrind anything you want.
-
- Airman basic
- Posts: 4
- Joined: Mon 11. May 2009, 12:39
- Gender: male
- Music instruments you're playing: Guitar and drums
Re: Camshaft question
Thank you very much! I will do that.
Who is online
Users browsing this forum: No registered users and 21 guests