Bendix FM Radio Fabrication....

Post your Tips Tricks and How Tos
Post Reply
User avatar
Air Education & Training Command
Air Education & Training Command
Posts: 186
Joined: Wed 24. Dec 2008, 06:03
Gender: male
Music instruments you're playing: Acoustic Guitar ... when I was young
Location: South Jersey 08062

Bendix FM Radio Fabrication....

Post by 59lincolnrag » Sun 3. Oct 2010, 14:03

Bendix FM Radio Fabrication....Playing around with Reverse Engineering with various MEL items ...
Here is the Aluminum FM chassis in auto-cad. Its a three part piece and has two steel pedestals to mount it to the transmission hump.
The right and left Pedestals fresh off the break press.....
This picture shows the leading edge or the front
This unit is actually made from Aluminum. I only have pre-paint Black and white 20 gauge steel so I set up the Turret.and banged some out.
The next operation is to make the "step" on the front a back edge. This will allow the front and back end plates to interlock with the chassis. This is the wrong side ...just a practice piece...
Ok that looks better....I'll do a practice run making the bends .......
OK this is the final design on the flat......
...............with louvers punched.
Cad Dwg's
Finished housings Pre-paint steel......
Pedestals attached .....
Side view......

Special Thanks goes out to my friend Walter Who supplied me with a sample FM Radio.
Thanks to Frank my in-house designer.
Also My Special friend Scott (sbakar) from California who supplied the sample pedestal.
2002 Lincoln Blackwood
1959 Lincoln Continental Coupe blk on blk
430 Tri-Power Super Marauder
1959 Lincoln Continental Convertible wht on wht
2006 Lincoln Town Car

Posts: 24
Joined: Tue 14. Jul 2009, 13:24
Gender: male

Re: Bendix FM Radio Fabrication....

Post by sidesho_bob1961 » Sun 3. Oct 2010, 16:47

Are you by chance planning on selling these to the general public?? Thanks, Bob

Post Reply

Return to “Tutorials Tips Tricks and How To. Written By Board Members”

Who is online

Users browsing this forum: No registered users and 1 guest