DIY 010-B Super Marauder Fabrication Linkage and parts

Post your Tips Tricks and How Tos
Post Reply
User avatar
59lincolnrag
Air Education & Training Command
Air Education & Training Command
Posts: 217
Joined: Wed 24. Dec 2008, 06:03
Gender: male
Music instruments you're playing: Acoustic Guitar ... when I was young
Location: South Jersey 08062

DIY 010-B Super Marauder Fabrication Linkage and parts

Post by 59lincolnrag » Thu 23. Sep 2010, 17:09

DIY010-B Super Marauder Restoration, (fabrication) Linkage and other parts

CAUTION: When using this equipment you may inadvertently extract animals and pedestrians from sidewalks.
Use Extreme caution when applying the accelerator!!


HPIM2921.JPG
Here is the elusive factory linkage for the Super Marauder. I have replaced the nylon bushing with a bronze one. There are two nylon washers used on either side of the slide that are not shown here. There are better aftermarket linkages available if you would like to upgrade.
HPIM2920.JPG
Assorted parts .......
HPIM2924.JPG
New modified throttle shafts, bronze bushings, 7/16 and 3/8 reamers.
HPIM2922.JPG
Special slide bracket to accept Tri-Power linkage. Bolts on to stock 2bbl Holley.
HPIM2923.JPG
Rough cut accessories....throttle stops.

Thanks to Frank my in-house designer who made auto-cad drawings of these parts.
Also My Special friend Scott from California who supplied detailed pictures of his own set-up.
2002 Lincoln Blackwood
1959 Lincoln Continental Coupe blk on blk
430 Tri-Power Super Marauder
1959 Lincoln Continental Convertible wht on wht
2006 Lincoln Town Car

Post Reply

Return to “Tutorials Tips Tricks and How To. Written By Board Members”

Who is online

Users browsing this forum: No registered users and 8 guests