Fuel Pump Cam to Timing Cover Interference

Post your Tips Tricks and How Tos
Post Reply
58-Pagoda
Senior Airman
Senior Airman
Posts: 125
Joined: Sat 7. Aug 2010, 23:56
Gender: male

Fuel Pump Cam to Timing Cover Interference

Post by 58-Pagoda » Tue 17. Apr 2012, 14:25

I came across a tech article in an issue of the Continental Comments from years ago- it said to be real careful about rebuilt water pumps because if the rebuilder replaced the rear cover bolts with standard head-size bolts it will interfere with the timing cover and may have pushed it in in your case. The solution was to grind down the bolt heads. It's good advice that can be easily overlooked.
430 water pumpx.JPG

A rebuild pump I recently purchased. Note the replacement bolts with red X vs. the original bolts.
IMG_20120729_195837y.jpg

User avatar
59lincolnrag
Air Education & Training Command
Air Education & Training Command
Posts: 149
Joined: Wed 24. Dec 2008, 06:03
Gender: male
Music instruments you're playing: Acoustic Guitar ... when I was young
Location: South Jersey 08062

Re: Fuel Pump Cam to Timing Cover Interference

Post by 59lincolnrag » Sun 1. Jan 2017, 11:58

Great information Thank you ..
2002 Lincoln Blackwood Black on Black on Black on Black ...did I say Black...
2007 Mercury Gran Marquis
1959 Lincoln Continental Coupe (blk on blk)
430 Tri-Power Super Marauder
1959 Lincoln Continental Convertible (wht on wht)

Post Reply

Return to “Tutorials Tips Tricks and How To. Written By Board Members”

Who is online

Users browsing this forum: No registered users and 1 guest