tri-power

Discuss everything about the Tripower induction.
Treinarts
Airman First Class
Airman First Class
Posts: 72
Joined: Fri 23. Jan 2009, 07:56
Gender: male
Music instruments you're playing: none

Re: tri-power

Post by Treinarts » Tue 3. Aug 2010, 11:17

600 for the bare manifold. He may take less now that the swap meet is over.
I have the phone number at home. I'll post it tomorrow.
As for the six duce set up, I'll pick up some of the Demon replica Stomberg 97s. Not going to try to revive six old carbs.
TJR

User avatar
buddy67lincoln
Senior Airman
Senior Airman
Posts: 129
Joined: Tue 23. Dec 2008, 09:28
Gender: male
Music instruments you're playing: The Kazoo
Location: Pittsburgh, PA
Contact:

Re: tri-power

Post by buddy67lincoln » Tue 3. Aug 2010, 16:33

Treinarts wrote:600 for the bare manifold. He may take less now that the swap meet is over.
I have the phone number at home. I'll post it tomorrow.
As for the six duce set up, I'll pick up some of the Demon replica Stomberg 97s. Not going to try to revive six old carbs.
TJR
Very nice! Reliability is my thing. I like the old school parts but I want it run well too. Those old carbs would be a headache. Getting the best of both worlds. Good luck
John Lyman
1964 Continental Convertible (actually working on this one!)
1967 Continental Coupe (bucket of rust)
1966 Continental Coupe (mild custom some day???)
1967 Continental 4 door (30,000 miles, part car)
1967 Continental 4 door (scrapped)

Treinarts
Airman First Class
Airman First Class
Posts: 72
Joined: Fri 23. Jan 2009, 07:56
Gender: male
Music instruments you're playing: none

Re: tri-power

Post by Treinarts » Thu 5. Aug 2010, 13:05

Guy's name is Andy Allen. San Francisco number 415 388 8695.
Stock 430 tri power bare manifold. It was clean, glass beaded I think.
Good luck. TJR

BenderJ
Airman basic
Posts: 13
Joined: Wed 5. May 2010, 15:56
Gender: male

Re: tri-power

Post by BenderJ » Thu 5. Aug 2010, 13:49

Much thanks!! :D

User avatar
buddy67lincoln
Senior Airman
Senior Airman
Posts: 129
Joined: Tue 23. Dec 2008, 09:28
Gender: male
Music instruments you're playing: The Kazoo
Location: Pittsburgh, PA
Contact:

Re: tri-power

Post by buddy67lincoln » Thu 5. Aug 2010, 14:22

Between $400-500 would be a great deal. Some that even need repairs are going for that. If someone ends up with it...show us some photos.
John Lyman
1964 Continental Convertible (actually working on this one!)
1967 Continental Coupe (bucket of rust)
1966 Continental Coupe (mild custom some day???)
1967 Continental 4 door (30,000 miles, part car)
1967 Continental 4 door (scrapped)

64Lincoln
Airman basic
Posts: 14
Joined: Mon 23. Nov 2009, 10:08
Gender: male

Re: tri-power

Post by 64Lincoln » Fri 6. Aug 2010, 08:15

Slowly but surely the rebuild is moving along. There is a linkage problem now, it appears there's some special bracket needed for the center carb for the linkage to function properly. :evil: Looks a lot different from the original photos on page one. I will keep everyone posted. I just hope it's not snowing up here before I get the finished product.
Attachments
DSCN3125.JPG
Rear.jpg
Ozanam012[1].jpg
Ozanam014[1].jpg
Last edited by 64Lincoln on Fri 6. Aug 2010, 13:15, edited 1 time in total.

User avatar
buddy67lincoln
Senior Airman
Senior Airman
Posts: 129
Joined: Tue 23. Dec 2008, 09:28
Gender: male
Music instruments you're playing: The Kazoo
Location: Pittsburgh, PA
Contact:

Re: tri-power

Post by buddy67lincoln » Fri 6. Aug 2010, 13:13

You might want to contact Joe Bunetic. I know his info is on here somewhere. Do a search if you have to. He is the Ford tri power genius. He may have one or can get you one or make it...who knows! It looks reeeeeeal niiiiiiice! Can't wait to see it all done. What will you do with the hood clearance?
John Lyman
1964 Continental Convertible (actually working on this one!)
1967 Continental Coupe (bucket of rust)
1966 Continental Coupe (mild custom some day???)
1967 Continental 4 door (30,000 miles, part car)
1967 Continental 4 door (scrapped)

64Lincoln
Airman basic
Posts: 14
Joined: Mon 23. Nov 2009, 10:08
Gender: male

Re: tri-power

Post by 64Lincoln » Fri 6. Aug 2010, 13:18

I took everyone's advise and Joe built the linkage, he is now being contacted about he bracket. I am just keeping my fingers crossed regarding the hood clearance. If it doesn't fit, I will just have to rebuild another 430 for another project, maybe a 56 Mark II. :shock:

User avatar
buddy67lincoln
Senior Airman
Senior Airman
Posts: 129
Joined: Tue 23. Dec 2008, 09:28
Gender: male
Music instruments you're playing: The Kazoo
Location: Pittsburgh, PA
Contact:

Re: tri-power

Post by buddy67lincoln » Sat 7. Aug 2010, 06:18

I've got a solution if your interested but you will need a donor hood. I have several for my 66-67 and I may have to do this if I add spacers like I intend to. With my 66/67 the hood will close with a 2" filter (but not with that S.M. cover) but I did not have a spacer mocked up either. I know its very close but I believe 65 and earlier have less hood clearance but I could be wrong.

My proposition is getting a donor hood and making a nice low rise slit across the front of the hood and raising it 1" just like the 1953-54 Packard Caribbean. They have glass hoods but its something that can be done with some cutting on our steel hoods. I will be doing this to avoid the need for an actual hood scoop which a Lincoln would look weird with...but its been done! Good luck and if it done fit..chrome everything out and go hoodless!
John Lyman
1964 Continental Convertible (actually working on this one!)
1967 Continental Coupe (bucket of rust)
1966 Continental Coupe (mild custom some day???)
1967 Continental 4 door (30,000 miles, part car)
1967 Continental 4 door (scrapped)

64Lincoln
Airman basic
Posts: 14
Joined: Mon 23. Nov 2009, 10:08
Gender: male

Re: tri-power

Post by 64Lincoln » Mon 9. Aug 2010, 07:10

Hoodless would be a bad look. I mean bad in a good way. Here's what I got now.
Attachments
Current Engine.jpg

Post Reply

Return to “The MEL Engine Tripower Heaven”

Who is online

Users browsing this forum: No registered users and 2 guests