Page 1 of 1
tri power carb to intake nut's
Posted: Fri 28. Dec 2012, 15:18
by alvin
Where can i find the 5/16" fine thread nut that takes a 7/16 wrench, standard 5/16" takes a 1/2 inch wrench I need 12, thanks
Re: tri power carb to intake nut's
Posted: Mon 21. Jan 2013, 20:14
by alvin
found the 5/16" fine thread that takes a 7/16" wrench at AMK Products
Re: tri power carb to intake nut's
Posted: Sat 20. May 2017, 04:48
by 59lincolnrag
Mc Master Carr is a good source as well .............