Revision A : sections rewritten for clarity. (10/06/2023) DIY 045 Engine Cold Start MEL The first thing I do before starting a cold engine that's been sitting a while is to fill a squeeze bottle with fuel. My car seems to allow fuel to flow back to the tank. It may be that the poppet valves in the p...

block thermostats02.JPG If you have two Block Thermostats in the engine block remove them and leave the holes empty open hole.JPG The water diverters in the MEL 430 are a press fit. You will need to remove the old ones first. 118374891_10164020674855024_4217910018392014459_o.jpg New diverters insta...

The thermostat has two important jobs: 5653525_cqs_14209_pri_larg.jpg 1- Accelerates engine warm-up: By blocking the circulation of coolant between the engine and radiator until the engine has reached its predetermined temperature 2- Regulates the engine's operating temperature: By opening and clos...

MEL Transmission Tech Info and other Ford Products. Pan Gasket Identification Ford, Lincoln, Mercury, Edsel Fordomatic 2 speed 14 Bolts 1959 to 1964.JPG Small Case FMX 14 Bolts 1951 on.JPG Medium Case 14 Bolts 1955 on.JPG Large Case 14 Bolts 1958 to 1960.JPG Large Case 16 Bolts 1961 to 1965.JPG C6 ...

Rev C added Supplier Harmon Classic Brakes

Rev C July 2020 Added correct fluid information

THANK YOU DAVE for the quick response!

Daves site is no longer working

DIY012 MEL Starters...UPDATED.....7/20/2020 Rev C Add starter removal procedure

I am so busy that I haven't had time to drive it as yet. It seems to stop ok but Im just in my driveway. I have a major engine overhaul Im trying to complete with other folks needing things done. I will gladly advise you when I get to it.