--


  << Previous Topic | Next Topic >>Return to Index  

Lincoln bits

October 17 2008 at 6:46 AM
No score for this post
  (Login 66Lincoupe)
from IP address 136.2.1.101

I have some MEL parts that someone may be interested in. I have a 462 block, California heads with intact thermactor tubes (not that you'd want to keep those...) pistons and rods, timing cover (California with the oil fill) and intake all 1966; Basically a complete engine less crank and cam.

I also have a complete, low mile rebuild C-6 for the same with a torque converter. I have a bunch of other stuff, too... Tilt column, lower dash panel with map light and ignition switch, convertible pumps and cylinders, radiator.

I scrapped a '66 convertible last year to salvage parts for my Coupe so I have a bunch of stuff I thought I might be able to use someday... But as usual, the clutter just piles up and I have less and less room in the shop.

I am in Southeast Michigan if you're interested in any of this shoot me an e-mail (Lincoupe66@yahoo.com) or respond to this message with an offer (trades?)


 

Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - Lincoln bits
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum