Would anyone be interested in my NOS never been mounted blower manifold by weind??? this thing is a beast and i only no of one other and this is a clean complete piece with both blowouts to be included!! Im actually gonna start to sell my entire colection... ive just had alot happen in the last 6 months and im kinda burnt out on what used to be my passion.. im gonna finsh my last mel that i have in the works and im done.... so ive got cams, gears, blower manifold, pistons and rebuild kit, and a few other mechanicals like fuel pump and odds and ends... anyone interested in the whole lot?? i might be willing to trade for somthin??? what id realy like is a tranny adaptor plate kit for a gm tranny!!! let me know people im done......
Scoring disabled. You must be logged in to score posts.
Brian, shame to hear you are burned out. I hope someone can help you out. I'd like to get what I can for my 462 rebuild and hope to soon so I will be in touch this winter. Maybe once you see my 462 all done up with tri power and your parts...you might get some passion back! I know I am getting into this Hot Rod Lincoln stuff big time. I appreciate your willingness to have made so many parts and collected so much MEL stuff. Wish I was machinist and better mechanic or I would try to take on what you started. Good luck.
Scoring disabled. You must be logged in to score posts.
Brian...............e-mail me at BPerrenot@hotmail.com or call me at 281-687-1071. Lets talk about those parts. I am building a new long block for the AA Fuel Coupe that I can lay a load on and do burn outs etc.
Scoring disabled. You must be logged in to score posts.
Brian...............e-mail at BPerrenot@hotmail.com or call me at 281-687-1071. Lets talk about those parts. I am building a new long block for the AA Fuel Coupe that I can lay a load on and do burn outs etc.
Scoring disabled. You must be logged in to score posts.
Is anyone interested in the least???? I tried to trade the guy who does the gm tranny adaptor kits for the manifold but he says that this manifold wont fit all the MELS and i was under the impression that it would since it has never been mounted or portmatched so the ports are still new and you could size the ports to whatever heads you have, which i assumed would make it fit everything from 58+
Scoring disabled. You must be logged in to score posts.
Brian B,,,,this is brian P. I sent you an e-mail at your home addy. Read it and contact me. I may be interested. And,,,by-the-way, the manifold should fit all 383's, 410's or 430's. It wont fit (port match issues) on the 462's unless you use 430 heads. Then it will fit the 462.
Scoring disabled. You must be logged in to score posts.
