Anonymous (Login 1960jbird) from IP address 24.154.107.159
-
Does anyone know if the alternator mounts from the 1962 430 will fit on the 1960-430. I want to change out the gen to alternator, want to do it cheaper than the cost of a powergen.
Scoring disabled. You must be logged in to score posts.
Just make some custom brackets if you need to out of 1.5 X 3/16 flat bar. i did this to fit an internally regulated 200A GM 1 wire. This will allow you to get a great alternator for cheap!!
Scoring disabled. You must be logged in to score posts.
Just make some custom brackets if you need to out of 1.5 X 3/16 flat bar. i did this to fit an internally regulated 200A GM 1 wire. This will allow you to get a great alternator for cheap!!
Scoring disabled. You must be logged in to score posts.
The bracket will bolt to the front hole on the side of the block and as far as I know, both early and later versions had these holes although thay may not be tapped.
You should be able to mount a 3G 130A ALT to the engine. It is a 7" swing.
Scoring disabled. You must be logged in to score posts.
