Finally found someone versed in the MEL. He states he can regrind your hydraulic flat tappet cam to a later performance grind for $70.00.

OREGON CAM GRINDING

Ken Heard

http://www.oregoncamshaft.com/regrinding.html

Previous post regarding OREGON CAM GRINDING;

http://www.network54.com/Forum/257364/message/1085665923/New+MEL+Performance+Cams-Possible+Source

Not enough participants to generate order.

I had heard about these guys some time back. I was told that yes, they can and will re-gring 430 cams. Cool

URGENT: I need the correct spacing between the camshaft centerline and the crankshaft centerline for a 430 MEL. ANyone out there know this?

Like I said in the E-Mail, I have not been able to come across this spec, but the below post may help somewhat. If you get a good measurement on it, please post it.

http://www.network54.com/Forum/257364/thread/1141236659/477+MEL+-+534+MEL+specs+%28+the+stuff+of+dreams+%29