--


  << Previous Topic | Next Topic >>Return to Index  

430 and 462 questions

January 8 2006 at 3:48 PM
No score for this post
  (Login brushwolf)
from IP address 64.61.214.98

-
Hi, I was wondering if anyone could tell me a few things about the 430 and 462 differences? Are 430 and 462 both able to use a 390 flywheel? Are there any years of 430 and 462 that will not accept a manual transmission (because of no pilot bearing provision)? Both these engines are internally-balanced? Pistons and camshafts for 430 and 462 both equally hard to get? Thanks, Mike

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(Login KULTULZ)
MEL Forum Moderator
69.140.26.158

Previous Posts

No score for this post
January 17 2006, 1:15 PM 

The answers to your questions are contained throughout this site. There is a plethora (college word) of information here but due to the format has to be sought out.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - 430 and 462 questions
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum