--


  << Previous Topic | Next Topic >>Return to Index  

roller cam for a 430

August 26 2005 at 7:33 AM
No score for this post		   (Login mcgregor711)
from IP address 12.215.98.31
-
i just bought a roller cam for a 430.need lifters.is there any i can use.i didn't know if lifters from any other motor would work.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(Login KULTULZ)
MEL Forum Moderator
68.55.166.234

The FE Engine Valvetrain Is Basically The Same

No score for this post		August 26 2005, 9:42 PM 

Aftermarket rollers and rocker arms will work. Measure for correct pushrod length.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login BPerrenot)
158.35.225.229

Roller Cam for 430

No score for this post		November 29 2005, 10:37 AM 

Cool, was there two of them? I am looking for one myself.

Beep

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - roller cam for a 430
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum