--


  << Previous Topic | Next Topic >>Return to Index  

intake needed

April 2 2005 at 7:52 PM
No score for this post		   (Login 60montclair)
from IP address 69.176.61.204
-
does any one know where to get a 3x2 or 6x2 intake for a 430. have an all origional merc. montclair. needs a paint job. great origional interior. also needs exhaust.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Ron Garrett
(Login unclescooby)
12.222.158.100

intakes...i got em...

No score for this post		April 10 2005, 10:11 PM 

I've got the complete crower 8x2 setup with Ford 97 carbs and linkage and a hot 430 cam and also an edelbrock tripower setup with rochester carbs. Neither one was cheap but it looked like you were wanting to trade anyway. Drop me a note at chilicheesedog1@yahoo.com
Ron

 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login unclescooby)
12.222.158.100

Re: intakes...i got em...

No score for this post		April 10 2005, 10:15 PM 

There is also an Edelbrock 6x2 intake (bare) on Ebay right now for $285 if that helps. That guy has some cams usually too.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - intake needed
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum