--


  << Previous Topic | Next Topic >>Return to Index  

"58 Linc 430

October 28 2004 at 5:29 PM
No score for this post
  (Login KarlKj)
from IP address 69.196.185.245

-
Enjoy your forum and all the MEL info. Owned several Lincs from '49 to '60. My favourite is the '58 cont. convert. With regard to the 3X2 induction set-up, which I have seen in your various articles and photos, could you point out to me any articles on the internet on the mechanical differences from a stock 430 and the 430 with 400 hp. I know the comp. ratio was 10.5/1 but do not know what were the hardware and mechanicaL diffs internally on the 400 hp model. Thanks, keep 'em rolling. Cheers, Karl

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(Login KULTULZ)
MEL Forum Moderator
69.140.35.248

To The Best Of My Knowledge Karl...

No score for this post
October 30 2004, 2:52 PM 

The only difference between the 430 MARAUDER and SUPER MARAUDER was in the induction. It was designed by Bill Stroppe for MERCURY and LINCOLN used a modified version (as far as I have researched).

MEL had early design problems with cylinder heads and valvetrains. The first run of heads had larger valves, the cam more lift and duration. But most of that had been addressed by the APRIL '58 introduction of the option.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - "58 Linc 430
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum