--


  << Previous Topic | Next Topic >>Return to Index  

exhaust bolt pattern

August 30 2004 at 7:56 PM
No score for this post		   (Login 383ModelA)
from IP address 24.1.143.195
-
'58 383.

Is it the exact same as an FE or just look similar?

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
jeff
(Login jeffhamman)
68.13.244.175

exhaust

No score for this post		August 31 2004, 4:50 AM 

just looks sim. the spacing and physical size of ports are a little bit larger. overall length is about 3 in longer from end bolt to end bolt.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Anonymous
(Login 383ModelA)
24.1.143.195

headers?

No score for this post		August 31 2004, 10:22 PM 

So, has anyone tried to make headers? I'm trying to decide to stick with stock manifolds or attempt headers, but I think I'd need some flanges at the least for a starting point.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login KULTULZ)
MEL Forum Moderator
69.140.34.250

Exhausting Ideas

No score for this post		September 1 2004, 4:27 AM 

MERC HI-FLOW Exhaust Manifolds

http://www.network54.com/Forum/message?forumid=257364&messageid=1083900026

Shorty Headers;

http://www.network54.com/Forum/message?forumid=257364&messageid=1062628441

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - exhaust bolt pattern
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum