--


  << Previous Topic | Next Topic >>Return to Index  

3x2 430 Intake Manifold and carbs--Wanted

February 17 2004 at 6:04 PM
No score for this post		   (Login knowrules)
from IP address 4.60.76.0
-
I have a 58 turnpike with a 430--Looking for the complete intake setup--With pump if avaiable

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(Login KULTULZ)
MEL Forum Moderator
69.140.243.253

Possible Source

No score for this post		February 18 2004, 1:58 AM 

This gentleman specializes in FORD 3x2 setups and I understand comes across these complete setups at times.

Joe Bunetic
St. Louis
(618) 394-3580

http://www.gerlecreek.com/documents/tptechnical.htm

 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login 58lincoln)
12.75.191.6

58 Super Marauder

No score for this post		May 18 2004, 3:06 PM 

Joe Bunetic set up three NOS Holley 2300s for me a couple of years ago, built them to Super Marauder specs and they are now on my 58 Lincoln...runs excellent and very strong, he even found the old Ford fuel bowls so the setup looks original...excellent job and very reasonable..Dave in N.J.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - 3x2 430 Intake Manifold and carbs--Wanted
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum