--


  << Previous Topic | Next Topic >>Return to Index  

What are the engine dimensions of a 430?

April 6 2004 at 3:29 PM
No score for this post		   (Login lysinger)
from IP address 209.134.164.156
-
What are the engine dimensions of a 430? I didn't see any listed in the FAQ section. Also, was there a 4V intake made? I saw some 3x2s but would rather have a 4V if they were made.

thanks,

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply

(Login KULTULZ)
MEL Forum Moderator
69.140.62.242

Engine Size Specs

No score for this post		April 6 2004, 6:56 PM 

I don't have the exact size specifications on the MEL, but it is approximately the size (a little larger) than the FE (390). It weighs 740# as compared to the FE at approx. 650#.

The 3x2 was a very limited option in the first year of production and what you will find mainly will be 4V cast iron intakes.

http://www.bacomatic.org/~dw/fordv8/mel/mel.htm

As soon as I find a size comparison chart (FORD lists everything but the MEL) I will post it.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - What are the engine dimensions of a 430?
  << Previous Topic | Next Topic >>Return to Index  
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum