--

 Return to Index  

Lincoln bits

October 17 2008 at 6:46 AM
No score for this post
  (Login 66Lincoupe)
from IP address 136.2.1.101

 

I have some MEL parts that someone may be interested in. I have a 462 block, California heads with intact thermactor tubes (not that you'd want to keep those...) pistons and rods, timing cover (California with the oil fill) and intake all 1966; Basically a complete engine less crank and cam.

I also have a complete, low mile rebuild C-6 for the same with a torque converter. I have a bunch of other stuff, too... Tilt column, lower dash panel with map light and ignition switch, convertible pumps and cylinders, radiator.

I scrapped a '66 convertible last year to salvage parts for my Coupe so I have a bunch of stuff I thought I might be able to use someday... But as usual, the clutter just piles up and I have less and less room in the shop.

I am in Southeast Michigan if you're interested in any of this shoot me an e-mail (Lincoupe66@yahoo.com) or respond to this message with an offer (trades?)


 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum