--

 Return to Index  

Specs

August 21 2008 at 4:12 AM
No score for this post

  (Login Buddy67Lincoln)
from IP address 71.60.103.176


Response to Would you have specs on the cam and headers?

 

As for the cam, I have the cam card and I believe the duration is .050, but I will post it later and tell you what it says. The headers I have no info on yet since I am not buying them till later depending on how much money I have when I am ready to build the motor, and the rear end is stock posi right now at 2.80 I believe but I would like something around 3.50 ratio since the car weighs around 5,200lbs. I will get back to you on the cam once I pull the card out of the box.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses

  1. roller cam specs - treinarts on Aug 21, 3:20 PM
    1. Cam Specs - John on Aug 21, 5:27 PM
      1. one more thing - John on Aug 21, 5:38 PM
        1. Guess at the stocker first - any road tests? 17.32 at 80mph? - WerbyFord on Aug 22, 7:01 AM
          1. MOTOR TREND- SEP 1958 - KULTULZ on Aug 24, 8:18 AM
      2. wild not mild cam - treinarts on Sep 3, 1:17 PM
        1. wild not mild cam - John on Sep 3, 5:45 PM
        2. Re: wild not mild cam - John on Sep 3, 6:05 PM
          1. 440 is mild - treinarts on Sep 4, 9:01 AM
            1. Re: 440 is mild - John on Sep 14, 4:15 PM
     
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum