--

 Return to Index  

Valve seals

December 5 2007 at 1:47 AM
No score for this post		   (Login BPerrenot)
from IP address 143.81.252.13


Response to 58-60 O/H Gasket set
The FE's are exactly the same. The early MEL engines had very large valve springs with rotater type retainers that did not always come with valve stem seals. These were junk. The valve seals from the later model will work on the early models.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum