--

 Return to Index  

marine 430

April 16 2007 at 10:29 AM
No score for this post		   (Login 00llama)
from IP address 69.106.78.9
 

Came across a marine 430. Uses FE bellhousing. I need Motor mounts and nobody seems to list them and this block does not have usual bosses on side of block for standard auto mounts. Am I stuck with fabrication, or is there some used or old stock out there? TJR

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses

  1. Re: marine 430 - BlownM3 on Apr 16, 11:47 AM
    1. 1958-1960 MEL's had the same trans bolt pattern as an FE - hawkrod on Apr 17, 2:27 PM
     
  2. marine 430 - treinarts on Apr 16, 1:39 PM
    3.  
  3. Engine Mount Location - KULTULZ on Apr 18, 3:55 AM
    1. 430 marine - treinarts on Apr 18, 9:05 AM
    2. Early Mounts - KULTULZ on Apr 18, 4:08 PM
      1. mounts - treinarts on Apr 19, 10:40 AM
        1. Will Have To Fabricate - KULTULZ on Apr 19, 12:50 PM
          1. mounts - treinarts on Apr 21, 5:02 PM
          2. mounts - treinarts on Apr 23, 1:46 PM
            1. Mounts - KULTULZ on Apr 24, 2:06 AM
     
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum