--

 Return to Index  

isky stuff

April 2 2007 at 10:43 AM
No score for this post		   (Login 00llama)
from IP address 69.106.78.9


Response to Brian, you could try this one...........
 

I ran stock distrib on isky roller, no problems, even swapped back and forth with a Mallory marine dual point (that never ran quite right) without any problems. Remember that a 61 or later cam sprocket must be used and that may change spacing. ISKY catalog does not require, recomend or even sell distrib gear for any MEL cams. TJR

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses

  1. Re: isky stuff - brian on Apr 2, 7:38 PM
    1. isky stuff III - treinarts on Apr 4, 12:46 PM
     
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum