--

 Return to Index  

Re: Not Sure

February 8 2007 at 10:06 AM
No score for this post		BlownM3  (Login BlownM3)
from IP address 64.12.114.41


Response to Not Sure
Well i just found out that the FE shaft is 8.56" long. Guess I will measure mine and see what I come up with. Hopefully it will work, I would much rather put a new one vs a used one. Already cost me one engine.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Responses

  1. Heard That! - KULTULZ on Feb 8, 2:59 PM
    1. Re: Heard That! - BlownM3 on Feb 8, 11:08 PM
    2. Supplier FE billet drive oilpump.......... - Tjerk on Feb 9, 9:07 AM
     
  2. Oil pump drive MEL 430 1964 is........... - Tjerk on Feb 9, 8:58 AM
    1. Most Likely... - KULTULZ on Feb 12, 5:13 AM
    2. MEL SPECS - KULTULZ on Feb 14, 10:13 PM
     
Find more forums on CarsCreate your own forum at Network54
 Copyright � 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement  
Neue Seite 5
     
  The MEL Engine  Knowledge Base        The MEL Photo Section       Orig. FE Big Block Forum        FE Big Block Forum     Other Cool Links  

go back to page 1 of   The (MEL) 383, 410, 430, 462 cid Engine Forum