i have some 66-67 ford fairlane parts for sale or trade. complete front bucket seats with emblems even for 200.00 or will part out.
also looks like the shell i have will be getting cut up. it has very nice cowl structure and very nice passenger side quarter panel, make offer. also have the center front floor section where the tunnel hump cover mounts for automatic car. 9 inch open rear assembly with the 28 spline axles. gear ratio is 2.46 you could change the pinion and ring gear to make 3.0 or 3.25 or 3.50 or even 4.11 i want 325 for it as is. rear body panel is solid rear wheel houses are good. good front suspension parts available. all glasses available. call (847) 740-2759
Hi Jerry,
I have spoken to you before about some good rockers. You told me you had a '67 GTA shell, but you are located in Illinois. Unfortunately, I can't make it out there. I am located in PA. Maybe you can help me on this one. You say that you have a shell with good inner wheel wells? If so how much are you asking and are they pretty solid. I replaced my quarter panels and the inner wheel wells are rusted out approximately 2-3 inches away from the quarter. So I need the extension that welds to the lip of the quarter panel. Also if you hear of anyone else, who might be able to help me in my search of the rockers, I would greatly appreciate any leads. The rockers are for the '67 Conv. and the inner wheel wells are for the '66 Hardtop. Once again, Thank you.
Hello writing to inquire about the body parts , I am looking for the front cowl pannel that has the air vent caps is that available and what would your asking price be? Thanks
I was reading thru some old forum messages and saw where you were looking for a cowl ( a few years ago)Did you find one and would you mind sharing some info on repairing one? My 66 has a very rotten cowl vent!THANKS